Tag Archives: bearing

China Best Sales Agricultural Motorcycle Auto Track Trailer Front Wheel Hub Car Motorcycle Spare Parts 6301 6004 6203 6205 6310 Deep Groove Ball Bearing with High Precision bearing driver kit

Product Description

Agricultural Motorcycle Auto Track Trailer Front Wheel Hub Car Motorcycle Spare Parts 6310 Deep Groove Ball Bearing with high precision 

Bearing parameters:
 

CHROME STEEL*     Dimensions in mm unless otherwise specified
 
Bore O.D. Width Open Bearing Shielded Bearing Sealed Bearing Basic Load Ratings
      KN
HNS HNS HNS dynamic static
Reference Reference Reference C Co
20 42 12 6004 6004ZZ 6004-2RS 7.22 4.46
47 14 6204 6204ZZ 6204-2RS 12.7 6.5
52 15 6304 6304ZZ 6304-2RS 15.9 7.8
25 47 12 6005 6005ZZ 6005-2RS 10.1 5.85
52 15 6205 6205ZZ 6205-2RS 14 7.8
62 17 6305 6305ZZ 6305-2RS 22.5 11.6
80 21 6405 6405ZZ 6405-2RS 36.1 19.4
30 55 13 6006 6006ZZ 6006-2RS 10.2 6.91
62 16 6206 6206ZZ 6206-2RS 19.5 11.2
72 19 6306 6306ZZ 6306-2RS 28.1 16
90 23 6406 6406ZZ 6406-2RS 43.4 23.9
35 62 14 6007 6007ZZ 6007-2RS 16 10.3
72 17 6207 6207ZZ 6207-2RS 25.5 15.3
80 21 6307 6307ZZ 6307-2RS 33.2 19
100 25 6407 6407ZZ 6407-2RS 55 31
40 68 15 6008 6008ZZ 6008-2RS 13 11.5
80 18 6208 6208ZZ 6208-2RS 29.8 18
90 23 6308 6308ZZ 6308-2RS 39.8 23.3
110 27 6408 6408ZZ 6408-2RS 65.5 37.5
45 75 16 6009 6009ZZ 6009-2RS 21 14.9
85 19 6209 6209ZZ 6209-2RS 32.2 21
100 25 6309 6309ZZ 6309-2RS 51.1 30.5
120 29 6409 6409ZZ 6409-2RS 77.5 45.5
50 80 16 6571 6571ZZ 6571-2RS 22 16.2
90 20 6210 6210ZZ 6210-2RS 34 22.5
110 27 6310 6310ZZ 6310-2RS 59.9 36.9
130 31 6410 6410ZZ 6410-2RS 92.2 55.2
55 90 18 6011 6011ZZ 6011-2RS 30.4 22
100 21 6211 6211ZZ 6211-2RS 43.3 28.1
120 29 6311 6311ZZ 6311-2RS 71.5 44.6
140 33 6411 6411ZZ 6411-2RS 100 62.5
60 95 18 6012 6012ZZ 6012-2RS 30.7 22.7
110 22 6212 6212ZZ 6212-2RS 46.1 31.5
130 31 6312 6312ZZ 6312-2RS 79.4 50.4
150 35 6412 6412ZZ 6412-2RS 109 70
65 100 18 6013 6013ZZ 6013-2RS 32.1 24.9
120 23 6213 6213ZZ 6213-2RS 54.2 39.3
140 33 6313 6313ZZ 6313-2RS 89.5 59.7
160 37 6413 6413ZZ 6413-2RS 118 78.5
70 110 20 6014 6014ZZ 6014-2RS 38.6 30.6
125 24 6214 6214ZZ 6214-2RS 58.9 43.6
150 35 6314 6314ZZ 6314-2RS 101 66
180 42 6414 6414ZZ 6414-2RS 140 99.5
75 115 20 6015 6015ZZ 6015-2RS 31 33.1
130 25 6215 6215ZZ 6215-2RS 64.3 47.5
160 37 6315 6315ZZ 6315-2RS 111 74.2
190 45 6415 6415ZZ 6415-2RS 154 115
80 125 22 6016 6016ZZ 6016-2RS 47.5 39.8
140 26 6216 6216ZZ 6216-2RS 68.1 53.3
170 39 6316 6316ZZ 6316-2RS 120 83.9
200 48 6416 6416ZZ 6416-2RS 163 125
85 130 22 6017 6017ZZ 6017-2RS 50.8 42.8
150 28 6217 6217ZZ 6217-2RS 83.2 64
180 41 6317 6317ZZ 6317-2RS 132 96.5
210 52 6417 6417ZZ 6417-2RS 175 138
90 140 24 6018 6018ZZ 6018-2RS 58 49.8
160 30 6218 6218ZZ 6218-2RS 92.7 71.3
190 43 6318 6318ZZ 6318-2RS 145 108
225 54 6418 6418ZZ 6418-2RS 192 158
95 145 24 6019 6019ZZ 6019-2RS 57.8 50
170 32 6219 6219ZZ 6219-2RS 105 79.1
200 45 6319 6319ZZ 6319-2RS 157 122
100 150 24 6571 6571ZZ 6571-2RS 64.5 56.2
180 34 6220 6220ZZ 6220-2RS 118 88.4
215 47 6320 6320ZZ 6320-2RS 173 140
105 160 26 6571 6571ZZ 6571-2RS 71.8 63.2
190 36 6221 6221ZZ 6221-2RS 126 98.8
225 49 6321 6321ZZ 6321-2RS 173 145
110 170 28 6571 6571ZZ 6571-2RS 81.9 72.9
200 38 6222 6222ZZ 6222-2RS 136 112
240 50 6322 6322ZZ 6322-2RS 193 171
120 180 28 6571 6571ZZ 6571-2RS 88.7 79.7
215 40 6224 6224ZZ 6224-2RS 139 112
260 55 6324 6324ZZ 6324-2RS 217 196
130 200 33 6026 6026ZZ 6026-2RS 105 96.8
230 40 6226 6226ZZ 6226-2RS 148 125
280 58 6326 6326ZZ 6326-2RS 218 205
140 210 33 6571 6571ZZ 6571-2RS 116 108
250 42 6228 6228ZZ 6228-2RS 179 167
300 62 6328 6328ZZ 6328-2RS 275 272
150 225 35 6030 6030ZZ 6030-2RS 132 125
270 45 6230 6230ZZ 6230-2RS 190 183
160 240 38 6032 6032ZZ 6032-2RS 145 138
290 48 6232 6232ZZ 6232-2RS 215 218

About Deep Groove Ball Cearing

  • 6000 Series – Extra Light Ball Bearings – Ideal for limited space applications
  • 6200 Series – Light Series Ball Bearings – Balanced between space and load capacity
  • 6300 Series – Medium Series Ball Bearings – Ideal for heavier load capacity applications

Deep groove ball bearing component:

Rich bearings in stock:

OEM is available:


Application


Package:

A. Plastic paper + kraft paper + outer carton + Nylon bag
B. Tube package + outer carton + Nylon bag
C. Single box + outer carton + pallets
D. According to your requirement

For more information, contact us directly pls.
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Aligning: Non-Aligning Bearing
Separated: Unseparated
Rows Number: Single
Load Direction: Radial Bearing
Material: Bearing Steel
Contact Angle: 0
Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

track bearing

Can you explain the maintenance and lubrication requirements for track bearings?

Maintenance and lubrication are essential aspects of ensuring the optimal performance and longevity of track bearings. Proper maintenance practices and appropriate lubrication help minimize wear, reduce friction, prevent corrosion, and extend the service life of the bearings. Here’s an explanation of the maintenance and lubrication requirements for track bearings:

Maintenance Requirements:

  • Cleanliness: It is crucial to maintain a clean operating environment for track bearings. Regularly remove dirt, dust, and debris from the track and bearing surfaces to prevent contamination, which can lead to premature wear and damage.
  • Inspection: Periodically inspect the track bearings for signs of wear, damage, or misalignment. Check for excessive play, noise, or roughness during operation. If any issues are detected, take appropriate measures such as bearing replacement or realignment to ensure optimal performance.
  • Tightening and Fasteners: Check the tightness of fasteners, such as bolts or screws, that secure the track bearings. Loose fasteners can lead to misalignment or instability. Ensure that all fasteners are properly tightened according to the manufacturer’s specifications.
  • Track Alignment: Proper track alignment is crucial for smooth and efficient operation of track bearings. Regularly check the alignment of the track or guide rails and make necessary adjustments to maintain proper alignment, minimizing excessive loads and wear on the bearings.
  • Load Limits: Adhere to the specified load limits for the track bearings. Exceeding the recommended load capacity can cause premature wear and failure. Consider the dynamic and static load ratings of the bearings to ensure they are not subjected to excessive loads that can compromise their performance.

Lubrication Requirements:

  • Proper Lubricant Selection: Select the appropriate lubricant based on the operating conditions, such as temperature, load, and speed. Consult the manufacturer’s recommendations or seek expert advice to ensure the lubricant’s compatibility with the track bearings and the specific application.
  • Regular Lubrication: Follow a regular lubrication schedule as recommended by the manufacturer. This may involve applying lubricant at specified intervals or based on the operating hours. Adequate lubrication helps minimize friction, reduce wear, and maintain proper functioning of the track bearings.
  • Correct Lubrication Method: Apply the lubricant using the appropriate method, whether it’s manual greasing, automatic lubrication systems, or specialized lubrication techniques. Ensure that the lubricant reaches all necessary contact points and provides sufficient coverage to the bearing surfaces.
  • Monitoring and Replenishment: Monitor the lubricant levels regularly and replenish as needed. In some cases, track bearings may have built-in lubrication systems that require periodic refilling or maintenance. Keep track of the lubricant condition and replace it when it becomes contaminated or degraded.
  • Environmental Considerations: Consider the operating environment when selecting the lubricant. Extreme temperatures, exposure to moisture, or the presence of chemicals or contaminants may require special lubricants that can withstand these conditions and provide effective protection and lubrication.

It is important to consult the manufacturer’s guidelines and recommendations specific to the track bearings being used. Following the recommended maintenance and lubrication practices ensures optimal performance, reduces the risk of premature failure, and maximizes the overall lifespan of the track bearings.

track bearing

How do track bearings enhance the overall efficiency and functionality of linear motion systems?

Track bearings play a crucial role in enhancing the overall efficiency and functionality of linear motion systems. They offer several benefits that contribute to improved performance, increased reliability, and enhanced functionality. Here’s a detailed explanation:

  • Reduced Friction: Track bearings are designed to minimize friction between moving components, allowing for smoother and more efficient linear motion. By reducing friction, they help to optimize the efficiency of the system, reducing energy consumption and minimizing wear on the components.
  • Precision and Stability: Track bearings provide precise guidance and stability to the linear motion system. They ensure accurate and repeatable motion along the intended path, allowing for precise positioning and control. This is particularly important in applications that require high accuracy, such as CNC machines, robotics, and automated assembly lines.
  • Load Distribution: Track bearings distribute the load evenly along their length, allowing for efficient load transfer and reducing the concentration of forces on specific components. This helps to prevent excessive wear, deformation, and premature failure of the system, improving overall reliability and longevity.
  • Handling Heavy Loads: Track bearings are specifically designed to handle heavy loads in linear motion systems. They offer high load capacities and robust construction, enabling them to support and move heavy objects with ease. This capability is essential in industries such as material handling, construction, and transportation.
  • Smooth and Quiet Operation: Track bearings are engineered to provide smooth and quiet operation, minimizing noise and vibrations in the linear motion system. This is especially important in applications where noise reduction and comfort are critical, such as in medical equipment, office automation, and consumer electronics.
  • Versatility and Adaptability: Track bearings come in various designs, sizes, and configurations to accommodate different linear motion system requirements. They can be easily integrated into existing systems or customized to fit specific applications. This versatility allows for greater flexibility and adaptability in designing and implementing linear motion solutions.
  • Maintenance and Serviceability: Track bearings are designed for ease of maintenance and serviceability. They often feature removable components, such as seals or shields, that allow for inspection, cleaning, and lubrication. This simplifies maintenance tasks and reduces downtime, contributing to improved overall system efficiency and uptime.

By incorporating track bearings into linear motion systems, industries can benefit from increased efficiency, improved performance, and enhanced functionality. Whether it’s achieving precise positioning, handling heavy loads, reducing friction, or ensuring smooth operation, track bearings play a vital role in optimizing the overall efficiency and functionality of linear motion systems.

track bearing

Can you explain the different types of track bearings used in industrial and mechanical systems?

Track bearings, also known as track rollers or track follower bearings, come in various types to suit different industrial and mechanical system requirements. Let’s explore the different types of track bearings commonly used in these applications:

  • Yoke Type Track Rollers: Yoke type track rollers are a popular type of track bearing characterized by their thick outer rings. They are designed to handle high radial loads and moderate axial loads. Yoke type track rollers feature an inner ring with a stud for mounting on a shaft or stud. They are widely used in applications such as conveyors, cam mechanisms, material handling systems, and agricultural machinery.
  • Stud Type Track Rollers: Stud type track rollers are similar to yoke type track rollers but lack an inner ring. Instead, they have a stud that serves as the mounting component. Stud type track rollers are suitable for applications with limited space or where the outer ring can be directly mounted onto a mating surface. They are commonly used in applications such as cam mechanisms, indexing equipment, and tensioning systems.
  • Cam Followers: Cam followers, also known as cam bearings or track followers, are track bearings designed specifically for cam-driven systems. They have a stud or shaft for mounting and a built-in roller or needle bearing. Cam followers follow the profile of a cam, converting the rotary motion of the cam into linear or oscillating motion. They are used in applications such as printing presses, packaging machinery, textile machinery, and automotive engines.
  • Guiding Track Rollers: Guiding track rollers are track bearings designed to provide precise and guided linear motion. They feature a thick outer ring with a track or guide surface. Guiding track rollers are commonly used in material handling systems, conveyor systems, and automated machinery to facilitate smooth and controlled movement along a track or guide rail.
  • V-Groove Track Rollers: V-groove track rollers have a specialized V-shaped groove on the outer ring. This groove allows the rollers to run on V-shaped tracks or rails, providing accurate alignment and guidance. V-groove track rollers are used in applications such as track systems, sliding gates, and linear motion guides.
  • Flanged Track Rollers: Flanged track rollers feature an additional flange on the outer ring. The flange helps in axial guidance and prevents the track roller from shifting or tilting under axial loads. Flanged track rollers are commonly used in applications such as cam mechanisms, linear motion systems, and conveyor systems.
  • Idler Track Rollers: Idler track rollers are non-powered track rollers used to support and guide conveyor belts, chains, or other moving components. They are typically used in material handling systems, conveyor systems, and packaging machinery.

These different types of track bearings offer versatility and flexibility in industrial and mechanical systems. Depending on the specific application requirements, engineers and designers can select the most suitable type of track bearing to ensure smooth motion, reliable operation, and efficient load support. The choice of track bearing type depends on factors such as load capacity, space constraints, track configuration, and environmental conditions.

China Best Sales Agricultural Motorcycle Auto Track Trailer Front Wheel Hub Car Motorcycle Spare Parts 6301 6004 6203 6205 6310 Deep Groove Ball Bearing with High Precision   bearing driver kitChina Best Sales Agricultural Motorcycle Auto Track Trailer Front Wheel Hub Car Motorcycle Spare Parts 6301 6004 6203 6205 6310 Deep Groove Ball Bearing with High Precision   bearing driver kit
editor by CX 2024-05-17

China manufacturer High Quality Wholesale Hot Sell Professional Track Escalator Tapered Roller Bearing carrier bearing

Product Description

Product Description

 

Packaging & Shipping

 

Company Profile

 

Our Advantages

 

FAQ

 

Basic Info. 

Model NO.  32005 35715 32205 32305 30305 Separated Separated
MOQ 1PCS Quality Guaranteed
Mainly Market America Europe Asia Africa Serive OEM
Stock Rich Stocks Feature High Precision, Small Torque, Low Noise
Transport Package Industrial Packing or as Per Requirement Specification  32005 35715 32205 32305 30305
Trademark FOS Bearing or OEM Origin YANDIAN, ZheJiang
HS Code 8482200000 Production Capacity 7000PCS/Month

Product Decription

Tapered roller bearings are separable bearings, and the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into different structural types such as single row, double row and 4 row tapered roller bearings according to the number of rows of rollers installed. Single row tapered roller bearings can bear radial loads and axial loads in 1 direction. When the bearing bears radial load, an axial component force will be generated, so another bearing that can bear the axial force in the opposite direction is needed to balance it.
Product  Series
More series of Roller bearing
3 series Roller bearing

BearingNo. Dimensions (mm) Load Rating(KN) Mass
d D T B C R r C C0 kg
min min
32004 20 42 15 15 12 1 1 25.1 28.2 0.095
32005 25 47 15 15 11.5 0.6 0.6 28 34.1 0.111
32006 30 55 17 17 13 1 1.5 40 45 0.175
32007 35 62 18 18 14 1 1 43.2 59.2 0.224
32008 40 68 19 19 14.5 1 1 55 62 0.27
32009 45 75 20 20 15.5 1 1 65 76 0.34
32571 50 80 20 20 15.5 1 1 67 79 0.36
32011 55 90 23 23 17.5 1.5 1.5 80.2 117.2 0.551
32012 60 95 23 23 17.5 1.5 1.5 81.7 122.2 0.59
32013 65 100 23 23 17.5 1.5 1.5 82.8 127.3 0.63
32014 70 110 25 25 19 1.5 1.5 104.3 160.1 0.85
32015 75 115 25 25 19 1.5 1.5 103.1 160.2 0.875
32016 80 125 29 29 22 1.5 1.5 141 220 1.27
32017 85 130 29 29 22 1.5 1.5 139.8 220.3 1.32
32018 90 140 32 32 24 2 1.5 171.3 271 1.73
32019 95 145 32 32 24 2 1.5 166 202 1.88
32571 100 150 32 32 24 2 1.5 173.1 281.7 1.873
32571 105 160 35 35 26 2.5 2 205.4 335.8 2.4
32571 110 170 38 38 29 2.5 2 245.7 403.4 2.972
32571 120 180 38 38 29 2.5 2 242.1 404.4 3.18
32026 130 200 45 45 34 2.5 2 340 563 5.04
32571 140 210 45 45 34 2.5 2 346 585 5.28

 
Production Process
Production Process

Inspection
Our Advantage

Package and shipment

Company Profile

HangZhou Siruibo Bearing Technology Co., Ltd. is a company mainly engaged in manufacturing and selling outer spherical bearings. The registered capital is Five million.

Since its establishment 20 years ago, the company is committed to Mounted Bearing Unit (maintenance-free bearings, engraving machine bearings, holding machine shaft Bearing, no-tillage machine bearing, fan bearing, high temperature bearing, zinc alloy bearing, food grade bearing unit) research and development. With the most complete varieties and best advanced manufacturing technology in production of Mounted Bearing Unit, to be a reliable enterprises, we welcome your cooperation.  Currently, our company produce 10 series of more than 260 varieties of outer spherical bearings and 13 different structural categories of outer spherical bearing special seats, all adopted  International standard design and manufacturing. Registered trademark “FOS” .

Through the efforts and unremitting pursuit of all employees of the company, all products accepted by international standards. Over the years of Expansion and technical transformation, we developed into a Mounted Bearing Unit with large scale of professional manufacturers, for the bearing industry in China, has made a contribution to the development of Bearing.

HangZhou Siruibo Bearing Technology Co., Ltd. has a production capacity of 1 million sets/year, with an annual output value of 30 million yuan. We produce 30 varieties monthly , with 45-60 days lead time.

The company has a perfect material and product quality inspection equipment, according to the strict scientific Quality assurance system,  to prove satisfactory to our customers.  Our products widely used in agricultural Industry machinery, textile machinery and light industry, chemical industry, metallurgy, printing, food, transportation, coal, packaging and other industries and the introduction of machinery .Our products have exported to Europe, America and many countries and regions in South east Asia.

Exhibitions

About us:
We are 1 manufactuer of bearing for more than 20 years.
Give us a chance, we will cooperate with our passion.
Our professional, reliable, experienced  products and service can meet your request.
Why choose us? 

SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS mix different standard bearings. 
2. MOQ: 3000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info. 

SUPORT
Please visit our bearings website, we strongly encourge that you can communicate with us through email, thanks! 
We have all kinds of bearings, just tell me your item number and quantity, best price will be offered to you soon
The material of the bearings, precision rating, seals type, OEM service, etc, all of them we can make according to your requirement. 
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Body: Roller Bearings
The Number of Rows: Single
Outer Dimension: Large (200-430mm)
Material: Bearing Steel
Spherical: Non-Aligning Bearings
Load Direction: Radial Bearing
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

track bearing

Can you provide examples of industries and applications where track bearings are frequently used?

Track bearings find extensive use in various industries and applications where smooth and controlled motion along tracks or guide rails is required. Let’s explore some examples of industries and applications where track bearings are frequently used:

  • Material Handling and Conveying: Track bearings are widely employed in material handling and conveying systems, such as conveyor belts, roller conveyors, and overhead cranes. They facilitate the smooth movement of goods, packages, and components along the tracks, ensuring efficient and reliable transportation within warehouses, distribution centers, manufacturing facilities, and airports.
  • Automotive and Transportation: Track bearings are utilized in various automotive applications, including suspension systems, steering systems, and sliding doors. They enable smooth and precise movement of components, contributing to vehicle performance, comfort, and safety. Additionally, track bearings are used in railway applications, such as railcar doors, sliding mechanisms, and track guidance systems.
  • Aerospace and Defense: Track bearings play a crucial role in aerospace and defense applications, including aircraft landing gears, flap systems, and missile launchers. They provide the necessary support, guidance, and load-carrying capacity for critical components, ensuring smooth and controlled motion in demanding operating conditions.
  • Industrial Machinery: Track bearings are commonly found in various industrial machinery and equipment. They are used in machine tools, robotics, printing presses, industrial ovens, and packaging machines, among others. In these applications, track bearings contribute to precise motion control, accurate positioning, and reliable performance of moving components.
  • Construction and Mining: Track bearings are extensively employed in construction and mining equipment, such as excavators, bulldozers, cranes, and drilling machines. They provide support and guidance for the movable parts, allowing efficient and controlled movement in rugged and demanding environments.
  • Medical and Healthcare: Track bearings are utilized in various medical and healthcare applications. They are used in hospital beds, medical imaging equipment, laboratory automation systems, and patient handling devices. Track bearings enable smooth and quiet operation, precise positioning, and patient comfort in these critical healthcare settings.
  • Renewable Energy: Track bearings are employed in renewable energy systems, including solar tracking systems and wind turbine pitch and yaw mechanisms. They enable the precise tracking of solar panels and the controlled adjustment of wind turbine blades, maximizing energy capture and optimizing system performance.

These examples represent just a fraction of the many industries and applications where track bearings are frequently used. The versatility, reliability, and precise motion control provided by track bearings make them a fundamental component in numerous mechanical systems across various sectors.

track bearing

Can track bearings be used in both light-duty and heavy-duty machinery applications?

Yes, track bearings can be used in both light-duty and heavy-duty machinery applications. They are versatile components that offer reliable support for linear motion in a wide range of industrial settings. Here’s a detailed explanation:

1. Light-Duty Machinery Applications:

In light-duty machinery applications, track bearings provide cost-effective and efficient solutions for various tasks. Light-duty track bearings are designed to handle lower loads and are commonly used in applications such as:

  • Office automation equipment
  • Consumer electronics
  • Printing machinery
  • Small conveyors and material handling systems
  • Automated vending machines
  • Textile machinery

These applications typically involve lighter loads and lower operating speeds, making light-duty track bearings suitable for providing smooth and reliable linear motion.

2. Heavy-Duty Machinery Applications:

Track bearings are also widely used in heavy-duty machinery applications that require robust components capable of handling substantial loads and challenging operating conditions. Heavy-duty track bearings are designed to withstand higher loads and offer increased durability. They are commonly employed in applications such as:

  • Material handling equipment
  • Construction machinery
  • Mining equipment
  • Transportation systems
  • Industrial automation
  • Large-scale conveyors
  • Steel mills

These applications often involve heavy loads, high operating speeds, and demanding environments. Track bearings in heavy-duty machinery applications are engineered to provide reliable performance, extended service life, and resistance to factors such as contamination, shock, and vibration.

Track bearings are available in various sizes, designs, and load capacities, allowing them to be tailored to the specific requirements of both light-duty and heavy-duty machinery applications. Manufacturers offer a range of options to accommodate different load capacities, operating conditions, and performance specifications.

It is important to consider the specific requirements and operating conditions of the machinery application when selecting track bearings. Consulting with bearing manufacturers or industry experts can help ensure the appropriate track bearings are chosen for optimal performance and reliability in both light-duty and heavy-duty machinery applications.

track bearing

Can you explain the different types of track bearings used in industrial and mechanical systems?

Track bearings, also known as track rollers or track follower bearings, come in various types to suit different industrial and mechanical system requirements. Let’s explore the different types of track bearings commonly used in these applications:

  • Yoke Type Track Rollers: Yoke type track rollers are a popular type of track bearing characterized by their thick outer rings. They are designed to handle high radial loads and moderate axial loads. Yoke type track rollers feature an inner ring with a stud for mounting on a shaft or stud. They are widely used in applications such as conveyors, cam mechanisms, material handling systems, and agricultural machinery.
  • Stud Type Track Rollers: Stud type track rollers are similar to yoke type track rollers but lack an inner ring. Instead, they have a stud that serves as the mounting component. Stud type track rollers are suitable for applications with limited space or where the outer ring can be directly mounted onto a mating surface. They are commonly used in applications such as cam mechanisms, indexing equipment, and tensioning systems.
  • Cam Followers: Cam followers, also known as cam bearings or track followers, are track bearings designed specifically for cam-driven systems. They have a stud or shaft for mounting and a built-in roller or needle bearing. Cam followers follow the profile of a cam, converting the rotary motion of the cam into linear or oscillating motion. They are used in applications such as printing presses, packaging machinery, textile machinery, and automotive engines.
  • Guiding Track Rollers: Guiding track rollers are track bearings designed to provide precise and guided linear motion. They feature a thick outer ring with a track or guide surface. Guiding track rollers are commonly used in material handling systems, conveyor systems, and automated machinery to facilitate smooth and controlled movement along a track or guide rail.
  • V-Groove Track Rollers: V-groove track rollers have a specialized V-shaped groove on the outer ring. This groove allows the rollers to run on V-shaped tracks or rails, providing accurate alignment and guidance. V-groove track rollers are used in applications such as track systems, sliding gates, and linear motion guides.
  • Flanged Track Rollers: Flanged track rollers feature an additional flange on the outer ring. The flange helps in axial guidance and prevents the track roller from shifting or tilting under axial loads. Flanged track rollers are commonly used in applications such as cam mechanisms, linear motion systems, and conveyor systems.
  • Idler Track Rollers: Idler track rollers are non-powered track rollers used to support and guide conveyor belts, chains, or other moving components. They are typically used in material handling systems, conveyor systems, and packaging machinery.

These different types of track bearings offer versatility and flexibility in industrial and mechanical systems. Depending on the specific application requirements, engineers and designers can select the most suitable type of track bearing to ensure smooth motion, reliable operation, and efficient load support. The choice of track bearing type depends on factors such as load capacity, space constraints, track configuration, and environmental conditions.

China manufacturer High Quality Wholesale Hot Sell Professional Track Escalator Tapered Roller Bearing   carrier bearingChina manufacturer High Quality Wholesale Hot Sell Professional Track Escalator Tapered Roller Bearing   carrier bearing
editor by CX 2024-05-16

China manufacturer Inch Track Roller Bearing for Equipments (CYR44V/CYR48V/CYR52V/CYR56V/CYR64V/CYR80V/CYR86V/CYR112V/CYR12VUU) ball bearing

Product Description


Company Information
WAREHOUSE/Test/CERTIFICATE

Roller bearing  of all kinds are our main product and our advantage.
WE SUPPLY YOU THE OTHER MODELS AS FOLLOWS
MCYRR-5 MCYR-5 MCYRR-6 MCYR-6 MCYRR-8 MCYR-8 MCYRR-10 MCYR-10 MCYRR-12 MCYR-12 MCYRR-15 MCYR-15 MCYRR-17 MCYR-17 MCYRR-20 MCYR-20 MCYRR-25 MCYR-25 MCYRR-30 MCYR-30 MCYRR-35 MCYR-35 MCYRR-40 MCYR-40 MCYRR-45 MCYR-45 MCYRR-50 MCYR-50 MCYRR-5-S MCYR-5-S MCYRR-6-S MCYR-6-S MCYRR-8-S MCYR-8-S MCYRR-10-S MCYR-10-S MCYRR-12-S MCYR-12-S MCYRR-15-S MCYR-15-S MCYRR-17-S MCYR-17-S MCYRR-20-S MCYR-20-S MCYRR-25-S MCYR-25-S MCYRR-30-S MCYR-30-S MCYRR-35-S MCYR-35-S MCYRR-40-S MCYR-40-S MCYRR-45-S MCYR-45-S MCYRR-50-S MCYR-50-S  BCYR-3/4-S  BCYR-7/8-S  BCYR-1-S      BCYR-1 1/8-S   BCYR-1 1/4-S   BCYR-1 3/8-S   BCYR-1 1/2-S BCYR-1 5/8-S  BCYR-1 3/4-S  BCYR-1 7/8-S  BCYR-2-S  BCYR-2 1/4-S  BCYR-2 1/2-S  BCYR-2 3/4-S  BCYR-3-S   BCYR-3 1/4-S  BCYR-3 1/2-S  BCYR-4-S  MCYRD-15  MCYRD-17 MCYRD-20 MCYRD-25 MCYRD-30 MCYRD-35 MCYRD-40  MCYRD-45  MCYRD-50  PCF-1 1/2   PCF-1 3/4 PCF-2  PCF-2 1/4  PCF-2 1/2  PCF-2 3/4  PCF-3  PCF-3 1/4  PCF-3 1/2  PCF-4  PCF-4 1/2   PCF-5   PCF-6  PCF-7  PCF-8  VCF-2 1/2  VCF-3 1/2  VCF-4 1/2  VCF-5 1/2  VCF-6 1/2  VCF-7 1/2  VCF-8 1/2    
PP/NATR40-PP/NATR45-PP/NATR50-PP/NA22,6-2RS,NA22,8-2RS,NA2200-2RS,NS2201-2RS,NA2202-2RS,NA2203-2RS,NA2204-2RS,NA2205-2RS,NA2206-2RS,NA2207-2RS,NA2208-2RS,NA2209-2RS,NA2210-2RS RSTO5/RSTO6/RSTO10/RSTO12/RSTO15/RSTO17/RSTO20/RSTO25/RSTO35/RSTO40/RSTO45/RSTO50 CYR12V/CYR14V/CYR16V/CYR18V /CYR20V/CYR22V/CYR24V/CYR26V/CYR28V/CYR30V/CYR32V/CYR36V/CYR40V/CYR44V/CYR48V/CYR52V/CYR56V/CYR64V/CYR80V/CYR86V/CYR112V/CYR12VUU/CYR14VUU/CYR16VUU/CYR18VU/CYR20VU/CYR22VUU/CYR24VUU/CYR44VU/CYR48VUU/CYR52VUU/CYR56VUU/CYR64VUU/CYR80VUU/CYR86VUU/CYR112VUU FR22EI/FR32EI/FR40EI/FR52EI/FR62EI/FRR22EI/FRR32EI/FRR40EI/FRR52EI/FRR62EI/FRN19EI/FRN22EI/FRN32EI/FRN40EI/FRNr19EI/FRNR22EI/FRNR32EI/FRNR40EI/SRF20/SRF20SS/SRF25/SRF25SS/SRF30/SRF30SS/SRF35/SRF35SS/SRF40/SRF40SS/SRF45/SRF45SS/SRF50/SRF50SS/SRF55/SRF55SS/SRF60/SRF65/SRF70/SRF75/SRF80OUR PROMISES
   Product quality standards are guaranteed. Our products have got ISO 9001 & CE international quality management system. They all produced with best advanced technology.We are proactive and we offer only products complying with top standards of quality and warranty. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Cage: With Cage
Rows Number: Single
Load Direction: Radial Bearing
Style: With Outer Ring
Material: Bearing Steel
Type: Open
Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

track bearing

How does proper installation and alignment impact the performance and longevity of track bearings?

Proper installation and alignment play a critical role in the performance and longevity of track bearings. Correct installation ensures that the bearings are positioned and secured accurately, while proper alignment ensures that the load is distributed evenly and the bearings operate smoothly. Here’s an explanation of how proper installation and alignment impact the performance and longevity of track bearings:

Installation Impact:

  • Load Distribution: Proper installation ensures that the track bearings are aligned and positioned correctly, allowing for even load distribution. When bearings are installed incorrectly, the load may be unevenly distributed, leading to excessive wear on certain parts of the bearings and reduced overall performance.
  • Stability and Rigidity: Accurate installation provides stability and rigidity to the track bearings. Properly secured bearings minimize the risk of movement or vibration during operation, which can cause additional stress, premature wear, and potential damage to the bearings and surrounding components.
  • Reduction of Misalignment: Correct installation minimizes the chances of misalignment between the track bearings and the track or guide rails. Misalignment can lead to uneven loading, increased friction, and accelerated wear and tear on the bearings. Proper alignment reduces these issues, ensuring smooth and efficient operation.
  • Prevention of Contamination: During installation, it is important to take precautions to prevent contamination of the track bearings. Proper handling techniques, cleanliness, and the use of appropriate tools or protective measures help avoid introducing dirt, dust, or debris that can compromise the bearing’s performance and longevity.

Alignment Impact:

  • Reduced Friction and Wear: Proper alignment of track bearings helps minimize friction and wear. When bearings are misaligned, excessive forces and irregular motion can occur, leading to increased friction and accelerated wear. Proper alignment ensures that the bearings operate within their intended design parameters, reducing friction and promoting longevity.
  • Optimal Load Distribution: Correct alignment ensures that the load is distributed evenly across the track bearings. This prevents excessive stress on specific areas of the bearings, reducing the risk of premature failure and extending their service life. Optimal load distribution also contributes to smoother operation and improved overall performance.
  • Minimized Noise and Vibration: Proper alignment helps minimize noise and vibration during operation. Misaligned track bearings can result in irregular motion, leading to unwanted noise and vibration that can affect the performance, comfort, and efficiency of the machinery or equipment. Proper alignment promotes smoother and quieter operation.
  • Improved Efficiency: When track bearings are correctly aligned, the machinery or equipment experiences reduced resistance and improved efficiency. Misalignment can result in energy losses, increased power consumption, and decreased overall efficiency. Proper alignment ensures optimal power transfer and minimizes energy wastage.

It is important to follow the manufacturer’s guidelines and recommendations for the specific track bearings being installed. Proper installation techniques, including accurate positioning, secure fastening, and appropriate alignment, contribute to the optimal performance, reliability, and longevity of track bearings in various applications.

track bearing

How do track bearings contribute to the precision, accuracy, and reliability of motion control systems?

Track bearings play a crucial role in enhancing the precision, accuracy, and reliability of motion control systems. They provide several key contributions that ensure smooth and consistent linear motion. Here’s a detailed explanation:

  • Precision Guidance: Track bearings offer precise guidance for linear motion systems. They are designed with close tolerances and accurate geometries, allowing for accurate positioning and control of the moving components. This precision guidance ensures that the desired motion is achieved with minimal deviation or error.
  • Smooth and Consistent Motion: By minimizing friction and providing smooth rolling or sliding surfaces, track bearings enable smooth and consistent motion in motion control systems. They reduce the effects of irregularities, misalignments, or vibrations, resulting in smoother operation and improved accuracy.
  • Repeatable Performance: Track bearings provide repeatable performance in motion control systems. They offer consistent and predictable motion characteristics, allowing for precise and repeatable positioning of the moving components. This repeatability is essential in applications that require high accuracy and consistency, such as CNC machining, semiconductor manufacturing, and precision measurement systems.
  • Load Distribution: Track bearings distribute the load evenly along their length, helping to minimize stress concentrations on specific components. This even load distribution improves the overall stability and reliability of the motion control system. It reduces the risk of component failure, deformation, or excessive wear, contributing to enhanced system reliability.
  • Minimized Play and Backlash: Track bearings are designed to minimize play and backlash, which are undesirable movements or clearances between components. Play and backlash can introduce inaccuracies and reduce the precision of motion control systems. Track bearings with tight tolerances and optimized designs help minimize these undesirable effects, ensuring precise and accurate motion.
  • Stiffness and Rigidity: Track bearings provide stiffness and rigidity to the motion control system. They resist deflection and maintain their shape under load, minimizing any unwanted flexing or bending. This stiffness enhances the overall stability and precision of the system, allowing for precise control and accurate motion even under varying loads or external forces.
  • Resistance to Contamination: Track bearings are often equipped with seals or shields to protect against contaminants such as dirt, dust, or liquids. This protection helps maintain the precision and reliability of the motion control system by preventing the ingress of particles that could interfere with the smooth operation of the bearings or cause premature wear and failure.

By incorporating track bearings into motion control systems, industries can benefit from improved precision, accuracy, and reliability. Whether it’s achieving precise positioning, ensuring consistent and repeatable motion, minimizing play and backlash, or providing reliable load distribution, track bearings contribute to the overall performance and integrity of motion control systems.

track bearing

Can you describe the load-carrying capacity and load ratings of track bearings?

Track bearings are designed to withstand and carry various types of loads while maintaining smooth and controlled motion along a track or guide rail. The load-carrying capacity and load ratings of track bearings are crucial factors to consider when selecting the appropriate bearing for a specific application. Let’s delve into these concepts:

Load-Carrying Capacity:

The load-carrying capacity of a track bearing refers to its ability to support and distribute the applied loads without excessive deformation or failure. It is influenced by several factors, including the bearing’s design, materials, and operating conditions. The load-carrying capacity is typically specified in terms of static load capacity and dynamic load capacity.

The static load capacity indicates the maximum load that a track bearing can support without permanent deformation. It is determined by the bearing’s internal geometry, material strength, and the contact area between the rolling elements and raceways. Static loads are those that do not cause relative motion between the bearing and the track, such as when the bearing is stationary or subjected to a constant load.

The dynamic load capacity represents the maximum load that a track bearing can handle while still allowing smooth rolling motion. It takes into account the bearing’s ability to handle both radial and axial loads and considers factors such as the bearing’s internal clearance, lubrication, and operating speed. Dynamic loads are those that cause relative motion between the bearing and the track, such as when the bearing is subjected to varying loads or subjected to motion along the track.

Load Ratings:

Load ratings provide standardized values that indicate the maximum allowable loads for track bearings based on industry standards. These load ratings are commonly provided by bearing manufacturers and help users select the appropriate bearing for their specific application requirements. The two primary load ratings used for track bearings are the radial load rating and the axial load rating.

The radial load rating specifies the maximum radial load that a track bearing can withstand while maintaining proper performance and service life. It is expressed as a static load rating and a dynamic load rating. The static radial load rating indicates the maximum radial load that the bearing can support without permanent deformation, while the dynamic radial load rating represents the maximum radial load that the bearing can handle under typical operating conditions.

The axial load rating indicates the maximum axial load that a track bearing can withstand without excessive deformation or failure. It considers the applied axial force in the direction perpendicular to the track or guide rail. The axial load rating is typically provided as a static load rating and a dynamic load rating.

It’s important to note that load ratings are based on specific operating conditions, such as a certain speed, lubrication, and temperature. It is necessary to consider the actual operating conditions and factors such as shock loads, vibrations, and misalignments when applying load ratings to real-world applications.

By understanding the load-carrying capacity and load ratings of track bearings, engineers and designers can make informed decisions to ensure reliable and safe performance of the bearings in their applications.

China manufacturer Inch Track Roller Bearing for Equipments (CYR44V/CYR48V/CYR52V/CYR56V/CYR64V/CYR80V/CYR86V/CYR112V/CYR12VUU)   ball bearingChina manufacturer Inch Track Roller Bearing for Equipments (CYR44V/CYR48V/CYR52V/CYR56V/CYR64V/CYR80V/CYR86V/CYR112V/CYR12VUU)   ball bearing
editor by CX 2024-05-15

China Custom Sliding Gate Wheels Bearing Rigid Caster with Bracket for V Track Rail bearing assembly

Product Description

V Groove Wheel Sliding Gate Rollers Pressure Bearing Pully Rollers

Products  name

Sliding Gate Wheels
Width 16mm
Diameter

78mm

Material

Galvanized steel

Load Capacity

660 lbs

Color

All colors available

Surface treatment 

Powder coating

Delivery  date

Normally ready goods and stock winthin 15 days for door hanger wheel 

Application

Aluminum windows , shower blocks, hanging round, closet wheel, toys, etc

Package

Industrial package or according to buyers’ requirement for door hanger wheel

Details

Features:1.Easy to be installed
               2.Low coefficient of friction
               3.High quality and competitive prices

At CZPT Hardware Co., Ltd, we have 10 years of experience in manufacturing OEM/ODM door hardware and furniture and we have 7 years of export experience, door handle and other types of door hardware and furniture hardware. Due to this experience and the expertise of our R&D staff, we can develop a new product based on your specifications in as fast as 2 days – with average times of just 7 days.

Turning out 100, 000 Products Monthly

Our factory covers an area of 10 acres, with 60-70 workers and 29 automatic machines. We have 29 sets automatic machines, including 2 pipe cutting machines, 2 pipe bending machines, 4 spot welding machines, 4 stamping machines, 1 automatic screw packing machine, 16 polishing machines, 2 CNC machines and 1 laser LOGO machine. And, we can guarantee completion of your orders in 30 to 45 days. To see your door hardware and furniture hardware designs brought to life fast, contact us today.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 1 Year
Warranty: 1 Year
Certification: CE
Splittable: Splittable
Surface Treatment: Chrome Plated
Material: Alloy
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

track bearing

What are the considerations for selecting the right track bearings for a particular application?

Selecting the right track bearings for a particular application requires careful consideration of various factors to ensure optimal performance, reliability, and longevity. Here are the key considerations to keep in mind:

  • Load Requirements: Assess the expected load conditions in the application. Consider both the static and dynamic loads that the track bearings will need to support. Determine the maximum load capacity required to ensure that the selected bearings can handle the anticipated loads without premature failure or excessive wear.
  • Speed and Acceleration: Evaluate the speed and acceleration requirements of the application. Higher speeds and rapid accelerations can impose additional stresses on the track bearings. Choose bearings with suitable speed and acceleration ratings to ensure they can operate effectively within the desired range without compromising performance or causing premature wear.
  • Environmental Factors: Consider the operating environment of the application. Evaluate factors such as temperature extremes, moisture, dust, chemicals, and potential exposure to corrosive substances. Select track bearings that are designed to withstand the specific environmental conditions to ensure optimal performance and longevity.
  • Track and Rail Compatibility: Assess the compatibility of the track bearings with the existing track or rail system. Consider factors such as track geometry, dimensional requirements, and mounting options. Ensure that the selected bearings are suitable for the specific track or rail design to facilitate proper installation, alignment, and smooth operation.
  • Maintenance and Lubrication: Evaluate the maintenance and lubrication requirements of the track bearings. Consider factors such as the need for regular maintenance, lubrication intervals, and the availability of suitable lubricants. Choose bearings that align with the desired maintenance practices and provide appropriate lubrication options based on the application’s operational demands.
  • Expected Lifespan and Reliability: Determine the desired lifespan and reliability expectations for the track bearings. Consider factors such as the projected operating hours, duty cycles, and the criticality of the application. Select bearings from reputable manufacturers known for producing high-quality, reliable products that align with the expected lifespan and reliability requirements.
  • Cost Considerations: Evaluate the cost-effectiveness of the track bearings. Consider the initial purchase cost as well as the long-term costs associated with maintenance, replacement, and potential downtime. Strive for a balance between the upfront investment and the overall value provided by the bearings in terms of performance, reliability, and longevity.

It is essential to consult with bearing manufacturers or industry experts who can provide guidance and recommendations based on the specific application requirements. By considering these factors and seeking expert advice, you can select the right track bearings that best meet the needs of your particular application.

track bearing

How do track bearings contribute to the precision, accuracy, and reliability of motion control systems?

Track bearings play a crucial role in enhancing the precision, accuracy, and reliability of motion control systems. They provide several key contributions that ensure smooth and consistent linear motion. Here’s a detailed explanation:

  • Precision Guidance: Track bearings offer precise guidance for linear motion systems. They are designed with close tolerances and accurate geometries, allowing for accurate positioning and control of the moving components. This precision guidance ensures that the desired motion is achieved with minimal deviation or error.
  • Smooth and Consistent Motion: By minimizing friction and providing smooth rolling or sliding surfaces, track bearings enable smooth and consistent motion in motion control systems. They reduce the effects of irregularities, misalignments, or vibrations, resulting in smoother operation and improved accuracy.
  • Repeatable Performance: Track bearings provide repeatable performance in motion control systems. They offer consistent and predictable motion characteristics, allowing for precise and repeatable positioning of the moving components. This repeatability is essential in applications that require high accuracy and consistency, such as CNC machining, semiconductor manufacturing, and precision measurement systems.
  • Load Distribution: Track bearings distribute the load evenly along their length, helping to minimize stress concentrations on specific components. This even load distribution improves the overall stability and reliability of the motion control system. It reduces the risk of component failure, deformation, or excessive wear, contributing to enhanced system reliability.
  • Minimized Play and Backlash: Track bearings are designed to minimize play and backlash, which are undesirable movements or clearances between components. Play and backlash can introduce inaccuracies and reduce the precision of motion control systems. Track bearings with tight tolerances and optimized designs help minimize these undesirable effects, ensuring precise and accurate motion.
  • Stiffness and Rigidity: Track bearings provide stiffness and rigidity to the motion control system. They resist deflection and maintain their shape under load, minimizing any unwanted flexing or bending. This stiffness enhances the overall stability and precision of the system, allowing for precise control and accurate motion even under varying loads or external forces.
  • Resistance to Contamination: Track bearings are often equipped with seals or shields to protect against contaminants such as dirt, dust, or liquids. This protection helps maintain the precision and reliability of the motion control system by preventing the ingress of particles that could interfere with the smooth operation of the bearings or cause premature wear and failure.

By incorporating track bearings into motion control systems, industries can benefit from improved precision, accuracy, and reliability. Whether it’s achieving precise positioning, ensuring consistent and repeatable motion, minimizing play and backlash, or providing reliable load distribution, track bearings contribute to the overall performance and integrity of motion control systems.

track bearing

Can you describe the load-carrying capacity and load ratings of track bearings?

Track bearings are designed to withstand and carry various types of loads while maintaining smooth and controlled motion along a track or guide rail. The load-carrying capacity and load ratings of track bearings are crucial factors to consider when selecting the appropriate bearing for a specific application. Let’s delve into these concepts:

Load-Carrying Capacity:

The load-carrying capacity of a track bearing refers to its ability to support and distribute the applied loads without excessive deformation or failure. It is influenced by several factors, including the bearing’s design, materials, and operating conditions. The load-carrying capacity is typically specified in terms of static load capacity and dynamic load capacity.

The static load capacity indicates the maximum load that a track bearing can support without permanent deformation. It is determined by the bearing’s internal geometry, material strength, and the contact area between the rolling elements and raceways. Static loads are those that do not cause relative motion between the bearing and the track, such as when the bearing is stationary or subjected to a constant load.

The dynamic load capacity represents the maximum load that a track bearing can handle while still allowing smooth rolling motion. It takes into account the bearing’s ability to handle both radial and axial loads and considers factors such as the bearing’s internal clearance, lubrication, and operating speed. Dynamic loads are those that cause relative motion between the bearing and the track, such as when the bearing is subjected to varying loads or subjected to motion along the track.

Load Ratings:

Load ratings provide standardized values that indicate the maximum allowable loads for track bearings based on industry standards. These load ratings are commonly provided by bearing manufacturers and help users select the appropriate bearing for their specific application requirements. The two primary load ratings used for track bearings are the radial load rating and the axial load rating.

The radial load rating specifies the maximum radial load that a track bearing can withstand while maintaining proper performance and service life. It is expressed as a static load rating and a dynamic load rating. The static radial load rating indicates the maximum radial load that the bearing can support without permanent deformation, while the dynamic radial load rating represents the maximum radial load that the bearing can handle under typical operating conditions.

The axial load rating indicates the maximum axial load that a track bearing can withstand without excessive deformation or failure. It considers the applied axial force in the direction perpendicular to the track or guide rail. The axial load rating is typically provided as a static load rating and a dynamic load rating.

It’s important to note that load ratings are based on specific operating conditions, such as a certain speed, lubrication, and temperature. It is necessary to consider the actual operating conditions and factors such as shock loads, vibrations, and misalignments when applying load ratings to real-world applications.

By understanding the load-carrying capacity and load ratings of track bearings, engineers and designers can make informed decisions to ensure reliable and safe performance of the bearings in their applications.

China Custom Sliding Gate Wheels Bearing Rigid Caster with Bracket for V Track Rail   bearing assemblyChina Custom Sliding Gate Wheels Bearing Rigid Caster with Bracket for V Track Rail   bearing assembly
editor by CX 2024-05-15

China high quality Yoke Type Track Roller Bearings Nutr35, Nutr3580, Nutr40, Nutr4090, Nutr45, Nutr45100, Nutr50, Nutr50110 carrier bearing

Product Description

Needle roller bearings contain many slender rollers with a length 3 to 10 times their diameter. Therefore, the ratio of the bearing outside diameter to the inscribed circle diameter is small, and they have a rather high radial load capacity. There are numerous types available, and many have no inner rings. The drawn-cup type has a pressed steel outer ring and the solid type has a machined outer ring. There are also cage-and-roller assemblies without rings. Most bearings have pressed steel cages, but some are without cages.
 

Model Number HK series, BK series, HK…RS series, HK…2RS series, BK…RS series, F series, FH series, MF series,  
HF series, CZPT series, K series, K…ZW series, KZK series, series, NK series, NKS series, RNA49 series,
RNA69 series, NKI series, NKIS series, NA49 series, NA69 series, NA48 series, NAO series, RNAO series,
RNA49…RS series, RNA49… 2RS series, RNAV series, NAV series, RPNA series, PNA series, IR series,
LR series, AXK series, AXW series, RSTO series, STO series, RNA2200 series, RNA2200…2RS series,
NA2200 series, NATR series, NATV series, NUTR series, PWTR series, NNTR series, KR series, KRE series,
KRV series, NUKR series, NUKRE series, PWKR series, PWKRE series.
Type needle roller bearing.
Number of Row single row, double row, multi row.
Material supreme chrome steel 100Cr6.
Cage Material steel, brass, nylon.
Hardness HRC 60-64.
Precision Rating P0, P6, P5.
Radial Clearance C0, C2, C3, C4, C5.
Sealing Type open, 2RS.
Grease as per your requirement, such as Chevron SRI-2 ,Multemp PS2, Shell Alvania R2, Changcheng 2 and so on.
Certification ISO 9001:2008.
Mark TIK or your mark.
Package single box package, industrial rolled package or as per buyer’s requirement.
Place of Origin China (Mainland).
Features (1) high precision;
(2) high speed;
(3) high load carrying capacity;
(4) low noise;
(5) long life span.
Application transport machinery, CNC machine, sewing machinery, handcart, physical exercise apparatus, motorcycle,
automobile, electric tool, leisure toys, textile machinery, printing machinery etc.
Payment Term  30% deposit, 70% is paid by TT or L/C or Western Union.
Shipment time ready stock, immediate shipment.
Shipping Port ZheJiang , ZheJiang or HangZhou.
Samples free samples are available.

 

Items d D B
  mm mm mm
NUTR15 15 35 19
NUTR1542 15 42 19
NUTR17 17 40 21
NUTR1747 17 47 21
NUTR20 20 47 25
NUTR2052 20 52 25
NUTR25 25 52 25
NUTR2562 25 62 25
NUTR30 30 62 29
NUTR3072 30 72 29
NUTR35 35 72 29
NUTR3580 35 80 29
NUTR40 40 80 32
NUTR4090 40 90 32
NUTR45 45 85 32
NUTR45100 45 100 32
NUTR50 50 90 32
NUTR50110 50 110 32

 

Packaging & Shipping

 

 

FAQ

 

FAQ

Q1: Are you a manufacturer or a trading company?
A: We have been a professional manufacturer of bearings since 1995 with ISO9001:2015 certificate.

Q2: How is the quality level of your bearings?
A: Our bearings are made of supreme GCr15 bearing steel and are produced with the first class workmanship. The tolerance grade could be P0, P6, P5, P4. The vibration level could be Z1V1, Z2V2, Z3V3.

Q3: Can I get samples to see the quality?
A: Yes, samples are free, but the courier charge shall be borne by the buyer.

Q4: Could you offer OEM service and print my logo/mark on the products?
A: Yes, we could. Please send us your mark registration files, we shall print your logo/mark on the bearings and package.

Q5: How is the lead time?
A: For regular items that are in stock, we could make shipment immediately right after your payment. If the goods are not in stock, our production time is from 15 to 45 days according to the quantity.

Q6: What if I receive defective product for my order?
A: All our bearings are 100% inspected strictly before packing. If you receive any defective product, please provide us photos or videos to show the problem. After confirmation, we shall send you the new product as replacement free of charge.

Q7: What is your term of payment?
A: Term of payment is negotiable. Usually it is 30% deposit in advance, and the balance 70% is paid when the goods are ready for shipment.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Body: Roller Bearings
The Number of Rows: Single
Outer Dimension: Small and Medium-Sized (60-115mm)
Material: Bearing Steel
Spherical: Non-Aligning Bearings
Load Direction: Radial Bearing
Customization:
Available

|

Customized Request

track bearing

Can you provide examples of industries and applications where track bearings are frequently used?

Track bearings find extensive use in various industries and applications where smooth and controlled motion along tracks or guide rails is required. Let’s explore some examples of industries and applications where track bearings are frequently used:

  • Material Handling and Conveying: Track bearings are widely employed in material handling and conveying systems, such as conveyor belts, roller conveyors, and overhead cranes. They facilitate the smooth movement of goods, packages, and components along the tracks, ensuring efficient and reliable transportation within warehouses, distribution centers, manufacturing facilities, and airports.
  • Automotive and Transportation: Track bearings are utilized in various automotive applications, including suspension systems, steering systems, and sliding doors. They enable smooth and precise movement of components, contributing to vehicle performance, comfort, and safety. Additionally, track bearings are used in railway applications, such as railcar doors, sliding mechanisms, and track guidance systems.
  • Aerospace and Defense: Track bearings play a crucial role in aerospace and defense applications, including aircraft landing gears, flap systems, and missile launchers. They provide the necessary support, guidance, and load-carrying capacity for critical components, ensuring smooth and controlled motion in demanding operating conditions.
  • Industrial Machinery: Track bearings are commonly found in various industrial machinery and equipment. They are used in machine tools, robotics, printing presses, industrial ovens, and packaging machines, among others. In these applications, track bearings contribute to precise motion control, accurate positioning, and reliable performance of moving components.
  • Construction and Mining: Track bearings are extensively employed in construction and mining equipment, such as excavators, bulldozers, cranes, and drilling machines. They provide support and guidance for the movable parts, allowing efficient and controlled movement in rugged and demanding environments.
  • Medical and Healthcare: Track bearings are utilized in various medical and healthcare applications. They are used in hospital beds, medical imaging equipment, laboratory automation systems, and patient handling devices. Track bearings enable smooth and quiet operation, precise positioning, and patient comfort in these critical healthcare settings.
  • Renewable Energy: Track bearings are employed in renewable energy systems, including solar tracking systems and wind turbine pitch and yaw mechanisms. They enable the precise tracking of solar panels and the controlled adjustment of wind turbine blades, maximizing energy capture and optimizing system performance.

These examples represent just a fraction of the many industries and applications where track bearings are frequently used. The versatility, reliability, and precise motion control provided by track bearings make them a fundamental component in numerous mechanical systems across various sectors.

track bearing

Are there potential challenges or limitations in using track bearings in specific industries?

While track bearings are widely used in various industries for their ability to support linear motion and handle heavy loads, there can be potential challenges and limitations associated with their use in specific industries. Here’s a detailed explanation:

1. Contamination and Harsh Environments:

Industries such as mining, construction, and agriculture often operate in harsh environments with high levels of contamination, including dust, dirt, and moisture. These contaminants can enter the track bearings and cause accelerated wear, reduced performance, and potential failure. Regular maintenance and appropriate sealing measures are required to mitigate these challenges.

2. High-Temperature Environments:

In industries like metal processing, glass manufacturing, and foundries, track bearings may be exposed to high temperatures. Excessive heat can affect the lubrication properties and structural integrity of bearings, leading to premature failure. Selecting track bearings specifically designed for high-temperature applications and using suitable lubricants are necessary to overcome this limitation.

3. Corrosive Chemicals:

Industries such as chemical processing, food and beverage, and wastewater treatment involve exposure to corrosive chemicals. Corrosion can significantly affect the performance and lifespan of track bearings. Choosing bearings made from corrosion-resistant materials or applying protective coatings can help address this challenge.

4. Heavy Load and Impact:

Industries like material handling, mining, and construction often require track bearings to withstand heavy loads and frequent impacts. Excessive load or impact can lead to premature wear, deformation, or even catastrophic failure of the bearings. Selecting track bearings with appropriate load capacities and impact resistance is crucial in these industries.

5. Precision and Accuracy:

In industries such as robotics, semiconductor manufacturing, and precision machining, track bearings may need to meet stringent requirements for precision and accuracy. Any deviation or play in the bearings can impact the overall performance and quality of the process. Using high-precision track bearings and ensuring proper alignment and installation are essential in these cases.

6. Speed and Acceleration:

Applications involving high-speed or rapid acceleration, such as automated assembly lines or conveyor systems, can impose additional challenges on track bearings. Excessive speed or acceleration can generate heat and vibration, leading to increased wear and reduced bearing life. Choosing track bearings with suitable speed and acceleration ratings is vital in these industries.

It is important to consult with bearing manufacturers or industry experts to identify and address any potential challenges or limitations specific to the industry and application at hand. By understanding these challenges and selecting track bearings designed to overcome them, industries can optimize performance, reliability, and longevity while mitigating risks and ensuring smooth operation.

track bearing

What are track bearings, and how are they used in various applications?

Track bearings, also known as track rollers or track follower bearings, are specialized rolling bearings designed to operate in track-based systems. They are used in various applications that require guided linear or rotational motion. Let’s explore in detail the characteristics of track bearings and their common applications:

  • Design and Construction: Track bearings typically consist of an outer ring, an inner ring, a set of rolling elements (such as rollers or needles), and a cage that holds the rolling elements together. The outer ring features a track or guide surface, while the inner ring is mounted on a shaft or stud. The rolling elements facilitate smooth rolling motion along the track, allowing for linear or rotational movement.
  • Guided Motion: Track bearings are primarily used to provide guided motion in applications where components need to move along a defined path or track. The outer ring’s track surface interfaces with the track or guide rail, ensuring precise and controlled motion. This guided motion is crucial in various applications such as material handling systems, conveyors, cam mechanisms, and automated machinery.
  • Load Support: Track bearings are designed to support and distribute loads, both radial and axial, in track-based systems. They can handle substantial loads while maintaining smooth motion and minimizing friction. The load-carrying capacity of track bearings makes them suitable for applications involving heavy loads, such as construction equipment, agricultural machinery, and industrial automation systems.
  • Multiple Types: Track bearings come in various types to suit different application requirements. Some common types include yoke type track rollers, stud type track rollers, and cam followers. Yoke type track rollers have thick outer rings and can withstand high radial loads. Stud type track rollers have a stud instead of an inner ring and are suitable for applications with limited space. Cam followers have a stud with a built-in roller and are commonly used in cam-driven systems.
  • Sealing and Contamination Protection: In many applications, track bearings are exposed to harsh environments and contaminants. To ensure reliable operation, track bearings often incorporate sealing arrangements or protective coatings. These features help prevent the ingress of dust, dirt, moisture, or other contaminants, prolonging the bearing’s service life and reducing the risk of premature failure.
  • Various Applications: Track bearings find applications in a wide range of industries and systems. Some common applications include:
    • Material Handling Systems: Track bearings are used in conveyors, roller tracks, and overhead cranes to facilitate smooth and guided movement of materials.
    • Automated Machinery: Track bearings are employed in automated machines and robotic systems for precise motion control and positioning.
    • Cam Mechanisms: Track bearings are utilized in cam-driven systems, where they follow the profile of the cam and translate the rotary motion into linear or oscillating motion.
    • Construction Equipment: Track bearings are found in construction machinery, such as excavators, bulldozers, and compactors, to support the tracks or guide wheels.
    • Agricultural Machinery: Track bearings are used in agricultural equipment, including tractors, combines, and harvesters, to support the tracks or guide wheels and provide reliable movement.
    • Printing and Packaging Machinery: Track bearings are employed in printing presses, packaging machines, and labeling systems to ensure precise and guided movement of the printing heads, packaging materials, or labels.

In summary, track bearings are specialized rolling bearings designed for guided linear or rotational motion along a track or guide rail. They provide precise motion control, support substantial loads, and find applications in various industries such as material handling, automation, construction, agriculture, printing, and packaging. With their ability to facilitate guided motion and handle significant loads, track bearings contribute to the smooth and reliable operation of track-based systems in a wide range of applications.

China high quality Yoke Type Track Roller Bearings Nutr35, Nutr3580, Nutr40, Nutr4090, Nutr45, Nutr45100, Nutr50, Nutr50110   carrier bearingChina high quality Yoke Type Track Roller Bearings Nutr35, Nutr3580, Nutr40, Nutr4090, Nutr45, Nutr45100, Nutr50, Nutr50110   carrier bearing
editor by CX 2024-05-15

China Best Sales Sto10zzdz Sto10 Sto10zz Support Yoke Roller Track Needle Bearing CZPT 10X30X16X15.8mm with Good quality

Product Description

STO10ZZDZ STO10 STO10ZZ Support Yoke Roller Track Needle Bearing CZPT 10x30x16x15.8mm
 

Cylindrical Roller Bearings

 

Spherical Roller Bearings
 
Needle Roller Bearings
Tapered Roller Bearings

 

Crossed Slewing bearing Thrust Roller Bearings

 

Detailed Photos

 

Products Details

HOJE offers a wide range of needle roller bearings including needle roller & cage assemblies, drawn cups,s and solid needle roller bearings. They can also be specified as cam followers and track roller bearings by applications. The major application markets include automotive, consumer products, and general industrial goods. Conveyor, Power Tool, Money Counter, and Home Appliance.

NEEDLE ROLLER AND CAGE ASSEMBLY
(K, K‥T2, K‥S, K‥ZW, KMJ, KMJ‥S, KJ‥S, KV‥S,PCJ….. Series)

A needle roller and cage assembly include needle rollers and a cage that guides and retains the rollers.
These assemblies use both the shaft and housing as raceway surfaces. Consequently, the cross-sectional thickness of the assembly is small, roughly equivalent to the diameter of the needle rollers. 
Because this bearing type has no inner or outer rings, the installation is much easier.
These assemblies are available in both single-row and double-row configurations.
As long as the tolerance limits of the shaft and housing are satisfied, the bearing radial internal clearance can be adjusted.

This bearing type is used for connecting rods in compact and mid-sized internal combustion engines (e.g. outboard engines and multipurpose engines), as well as reciprocating compressors.
 

DRAWN-CUP NEEDLE ROLLER BEARING
(HK, HK‥ZWD, HMK, HMK‥ZWD, BK, BK‥ZWD…… Series)

This bearing type includes an outer ring and needle rollers, which are both drawn from special thin steel plates by precision deep drawing, and a cage that guides the needle rollers precisely.
— This bearing product comprises an outer ring formed through a precision deep-drawing process from a thin special steel blank; needle rollers; and a cage that guides the rollers.
— A hardened and ground shaft or inner ring (IR Series) is used as the raceway.
— This bearing needs no axial clamping due to easy installation and a press-fit in the housing. 
— Both a closed-end type to close around the end of the shaft and an open-end type are available.
— Furthermore, a type with a seal installed on a single side or on both sides is also available.
— The standard type includes a needle roller and cage assembly. In addition to this type, a special type with full complement rollers is available as an option.

 

MACHINED-RING NEEDLE ROLLER BEARINGS
(RNA48, RNA49, RNA59, RNA69, NK, NKS,NA48, NA49, NA59, NA69, NK+IR, NKS+IR ……Series)

This product mainly includes machined components – an outer ring and inner ring, needle rollers, and a cage that guides the rollers. In this bearing, the cage or needle rollers are guided by the rib or side plate of the outer ring. Consequently, the roller and cage assembly cannot be separated from the outer ring.
— Available in both metric dimensions and inch dimensions.
— This product is best-suited to a space-saving design due to its low section height, and large load capacity. 
— Another advantage is high rigidity and high bearing accuracy due to the machined outer ring 
— This bearing can be used with a housing made of light metal, because of its highly rigid outer ring. (Other than NKS small-size products)
— The outer ring has a lubrication hole and lubrication groove. 
— Both single-row and double-row types are available. 
— A type with a seal installed on a single side or on both sides is also available.

THRUST NEEDLE ROLLER BEARINGS
(AXK11, AS11, WS811, GS811,811, 812, 893, 874, K811, K812, K893…… Series)

The product is comprised of a needle or cylindrical rollers, a cage that guides and retains the rollers, and a disk-shaped bearing ring, and is capable of holding an axial load in 1 direction. The mounting surface can be used as a raceway surface when the mounting surface is beat-treated and finished. As a result, the bearing can be supplied without bearing ring raceways.
— Space Saving Design: Best-suited to save space because of its small section height and large load capacity.
— Bearing Types: Currently available bearing ring types are AS, WS, GS, and ZS. The AS type consists of a thin steel disk having undergone surface hardening, while the WS, GS, and ZS types are machined.
— Bi-Direction Axial Loading: This bearing can support large axial loads from both sides.
— Application: This complex bearing is designed to support a machine tool precision ball screw.

CYLINDRICAL NEEDLE ROLLER ROLLER FOLLOWERS
(NA22, RNAB2, NAB2, NATR, NUTR2, NUTW, NATV, NACV…… Series)

The track roller bearing is a needle roller bearing with a thick outer ring, which is applied to the cam roller, CZPT roller, eccentric roller, or rocker’s arm. The track roller bearings are mainly categorized into a stud-type track roller bearing (cam follower) and a yoke-type track roller bearing (roller follower). Various types of roller followers and cam followers are available.
— The bearing type with a cage is suitable for comparatively high-speed running because its rollers are guided by the cage. 
— Having more rollers relative to a given size, a full complement roller type boasts greater load capacity.
— The outer surface is available in both spherical (crowning) profile and cylindrical profile. 
— This cam follower (bearing) is selectively available in both metric and inch sizes. 
— The stud is either a recessed head type allowing the use of a screwdriver or a hexagon socket head type so as to be mounted and adjusted easily

 

Packaging & Shipping

 

Packaging
 1)Commercial Bearings packaging: 1pc/plastic bag + color box + carton + pallet
 2)Industrial Bearings packaging 
 3)According to the requirement of customers
 Payment
 1) T/T:30% deposit, 70% should be paid before shipment.
 2) L/C at sight. (high bank charge, not suggested, but acceptable )
 3) 100% Western Union in advance. (especially for air shipment or small amounts)
 Delivery
 1) Less than 45 KGS, we will send by express. ( Door to Door, Convenient )
 2) Between 45 – 200 KGS, we will send by air transport. ( Fastest and safest, but expensive )
 3) More than 200 KGS, we will send by sea. ( Cheapest, but long time )

 

 

Company Profile

HangZhou HOJE Bearing Co., LTD Specializing in the manufacture and sales of bearings and bearing accessories, we mainly produce deep groove ball bearings, pillow block bearings, Cylindrical and Spherical Roller Bearings, tapered roller bearings, and related components. Our factory has the most advanced equipment, first-class mechanical professional and technical personnel, and one-stop automatic production from bearing raw materials to finished products. We are willing to provide excellent services for factories that produce industrial equipment, vehicles, electromechanical tools, home appliances, instrumentation, fitness equipment, leisure sports equipment, users of various types of mechanical equipment and civil machinery, and domestic and foreign traders and distributors.

Company Advantages

1. FREE SAMPLES: contact us by email or trade manager, and we will send the free samples according to your request.
2. World-Class Bearing: We provide our customers with all types of bearings of world-class quality.
3. OEM or Non-Stand Bearings: Any requirement for Non-standard bearings is Easily Fulfilled by us due to our vast knowledge and links in the industry.
4. Genuine products With Excellent Quality: Company has always proved the 100% quality products it provides with genuine intent.
5. After-Sales Service and Technical Assistance: Company provides after-sales service and technical assistance as per the customer’s requirements and needs.
6. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
7. Cost Saving: We provide long-life, shock-resistant, and high-reliability bearings with excellent quality and better performance. Resulting in increased cost savings.
8. Attending customer queries promptly: We believe that if customers are satisfied then it proves our worth well. Customers are always given quick support.

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Cage: With Cage
Rows Number: Single
Load Direction: Radial Bearing
Style: With Outer Ring, Without Inner Ring
Material: Bearing Steel
Type: Closed
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

track bearing

How does proper installation and alignment impact the performance and longevity of track bearings?

Proper installation and alignment play a critical role in the performance and longevity of track bearings. Correct installation ensures that the bearings are positioned and secured accurately, while proper alignment ensures that the load is distributed evenly and the bearings operate smoothly. Here’s an explanation of how proper installation and alignment impact the performance and longevity of track bearings:

Installation Impact:

  • Load Distribution: Proper installation ensures that the track bearings are aligned and positioned correctly, allowing for even load distribution. When bearings are installed incorrectly, the load may be unevenly distributed, leading to excessive wear on certain parts of the bearings and reduced overall performance.
  • Stability and Rigidity: Accurate installation provides stability and rigidity to the track bearings. Properly secured bearings minimize the risk of movement or vibration during operation, which can cause additional stress, premature wear, and potential damage to the bearings and surrounding components.
  • Reduction of Misalignment: Correct installation minimizes the chances of misalignment between the track bearings and the track or guide rails. Misalignment can lead to uneven loading, increased friction, and accelerated wear and tear on the bearings. Proper alignment reduces these issues, ensuring smooth and efficient operation.
  • Prevention of Contamination: During installation, it is important to take precautions to prevent contamination of the track bearings. Proper handling techniques, cleanliness, and the use of appropriate tools or protective measures help avoid introducing dirt, dust, or debris that can compromise the bearing’s performance and longevity.

Alignment Impact:

  • Reduced Friction and Wear: Proper alignment of track bearings helps minimize friction and wear. When bearings are misaligned, excessive forces and irregular motion can occur, leading to increased friction and accelerated wear. Proper alignment ensures that the bearings operate within their intended design parameters, reducing friction and promoting longevity.
  • Optimal Load Distribution: Correct alignment ensures that the load is distributed evenly across the track bearings. This prevents excessive stress on specific areas of the bearings, reducing the risk of premature failure and extending their service life. Optimal load distribution also contributes to smoother operation and improved overall performance.
  • Minimized Noise and Vibration: Proper alignment helps minimize noise and vibration during operation. Misaligned track bearings can result in irregular motion, leading to unwanted noise and vibration that can affect the performance, comfort, and efficiency of the machinery or equipment. Proper alignment promotes smoother and quieter operation.
  • Improved Efficiency: When track bearings are correctly aligned, the machinery or equipment experiences reduced resistance and improved efficiency. Misalignment can result in energy losses, increased power consumption, and decreased overall efficiency. Proper alignment ensures optimal power transfer and minimizes energy wastage.

It is important to follow the manufacturer’s guidelines and recommendations for the specific track bearings being installed. Proper installation techniques, including accurate positioning, secure fastening, and appropriate alignment, contribute to the optimal performance, reliability, and longevity of track bearings in various applications.

track bearing

Can track bearings withstand harsh environments or exposure to contaminants?

Track bearings are designed to operate in a wide range of environments, including harsh conditions and exposure to contaminants. However, the ability of track bearings to withstand such environments depends on their specific design, materials, and protective measures. Here’s a detailed explanation:

Many track bearings are engineered with features that enhance their resistance to harsh environments and contaminants. These features may include:

  • Sealing and Shielding: Some track bearings are equipped with seals or shields that provide a physical barrier against contaminants such as dirt, dust, water, and debris. These seals or shields help prevent the entry of contaminants into the bearing’s internal components, reducing the risk of damage and premature wear.
  • Corrosion Resistance: Track bearings intended for use in corrosive environments are often constructed from materials that offer high corrosion resistance. Stainless steel, for example, is commonly used due to its ability to withstand exposure to moisture, chemicals, and other corrosive substances.
  • Specialized Coatings: Some track bearings may feature specialized coatings or surface treatments that provide additional protection against contaminants and harsh conditions. These coatings can enhance the bearing’s resistance to corrosion, abrasion, and chemical exposure.
  • High-Temperature Capability: Certain track bearings are designed to withstand high-temperature environments. They are typically constructed using heat-resistant materials and lubricants that can maintain their structural integrity and performance even under extreme heat.
  • Environmental Sealing: In applications where track bearings are exposed to extreme conditions, such as underwater or in highly dusty environments, special environmental sealing measures may be employed. These measures can include the use of advanced sealing technologies or the encapsulation of the bearings within protective housings.

While track bearings are designed to withstand harsh environments and exposure to contaminants, it is important to note that their performance and longevity can still be affected over time. Regular maintenance, including cleaning, inspection, and lubrication, is crucial to ensure proper functioning and to mitigate the impact of contaminants on the bearings.

It is recommended to consult the manufacturer’s specifications and guidelines for the track bearings being used in a specific application. Manufacturers often provide information on the environmental ratings and limits of their bearings, helping users determine the suitability of the bearings for particular harsh environments or exposure to contaminants.

By selecting track bearings with appropriate features, materials, and protection, and by implementing proper maintenance practices, it is possible to enhance the bearings’ ability to withstand harsh environments and exposure to contaminants, thereby maximizing their performance and longevity.

track bearing

Are there specific materials commonly used in the construction of track bearings?

Yes, specific materials are commonly used in the construction of track bearings to ensure their durability, load-carrying capacity, and resistance to various operating conditions. Let’s discuss the materials commonly used for different components of track bearings:

  • Outer and Inner Rings: The outer and inner rings of track bearings are typically made from high-quality bearing steels such as chrome steel (e.g., AISI 52100) or stainless steel. These materials offer excellent strength, hardness, and wear resistance. Chrome steel is the most commonly used material due to its favorable combination of mechanical properties and cost-effectiveness. In some cases, specialized alloys or heat-treated steels may be used to enhance specific properties like corrosion resistance or high-temperature performance.
  • Rolling Elements: The rolling elements in track bearings are commonly made from bearing-grade steel or ceramic materials. Bearing-grade steel, similar to the materials used for the outer and inner rings, offers high strength and wear resistance. Ceramic materials, such as silicon nitride (Si3N4) or zirconia (ZrO2), are also used in certain applications where their advantages, such as high hardness, low density, and resistance to corrosion and high temperatures, are desired.
  • Cage: The cage in track bearings is typically made from materials such as steel, brass, or engineered polymers. Steel cages are commonly used due to their strength and durability. Brass cages offer good corrosion resistance and are suitable for certain operating environments. Engineered polymers, such as polyamide (nylon), are used in applications where low friction, noise reduction, or lightweight design is desired.
  • Seals or Shields: The seals or shields used in track bearings are made from various materials depending on the specific requirements. Common materials include rubber or synthetic elastomers for seals, and steel or stainless steel for shields. These materials provide effective protection against contaminants while maintaining proper lubrication within the bearing assembly.
  • Lubrication: Lubricants used in track bearings can vary depending on the application and operating conditions. Common lubrication options include mineral oils, synthetic oils, and greases. The lubricant’s formulation is carefully chosen to provide adequate lubrication, reduce friction and wear, and protect against corrosion and contamination.

Overall, the choice of materials for track bearings is influenced by factors such as load requirements, operating conditions (including temperature and moisture levels), desired lifespan, and cost considerations. By selecting appropriate materials for each component, track bearings can deliver reliable performance and extended service life in a wide range of industrial and mechanical applications.

China Best Sales Sto10zzdz Sto10 Sto10zz Support Yoke Roller Track Needle Bearing CZPT 10X30X16X15.8mm   with Good qualityChina Best Sales Sto10zzdz Sto10 Sto10zz Support Yoke Roller Track Needle Bearing CZPT 10X30X16X15.8mm   with Good quality
editor by CX 2024-05-15

China OEM Ru8509TM Track Roller Ru8509 Cylindrical Roller Bearing for Agricultural Plunger Baler wheel bearing

Product Description

DETA

 

ZheJiang Leicester Bearing Technology Co., Ltd. is a specialized manufacturer that produces various types of bearings, including cylindrical roller bearings (7 series, 97 series, 3007 series, 20097 series), British standard tapered roller bearings, deep groove ball bearings, spherical plain bearings, self-aligning roller bearings, rolling mill bearings, and a variety of non-standard bearings.
At our core, we believe in “Quality, Creating Value,” and we have gained the trust and support of customers both domestically and internationally by delivering high-quality products.
In 2002, we received certification from the China Import and Export Product Quality Verification Center and obtained ISO 9001, ISO 2000, and IATF 16949 quality management system certifications. Our successful collaborations with renowned domestic and international enterprises have made us reliable and stable suppliers. Moreover, we have provided bearing components to well-known bearing manufacturers worldwide.

 

PRODUCT OVERVIEW

Baaring No Dimension[mm Bearing Na. Dimension(mm
d D B d D T
N410 NF410 NU410 NJ410 NUP410 50 30 31       NJ2230   50 270 73
N411 NF411 NU411 NJ411 NUP411 55 40 33     NU2232 NJ2232   60 290 80
N412 NF412 NU412 NJ412 NUP412 65 50 35     NU2234 NJ2234   70 310 86
N413 NF413 NU413 NJ413 NUP413 70 160 37           15 35 18
N414 NF414 NU414 NJ414 NUP414 75 80 42 N2302         17 47 21
N415 NF415 NU415 NJ415 NUP415 0 90 45 N2303   NU2305 NJ2305   25 62 24
N416 NF416 NU416 NJ416 NUP416 5 200 48 N2305     NJ2306   30 72 27
N417 NF417 NU417 NJ417 NUP417 90 210 52 N2306     NJ2307 NUP2307 35 80 31
N418 NF418 NU418 NJ418 NUP418 95 225 54     NU2308 NJ2308 NUP2308 40 90 33
    NU419 NJ419   100 240 55 N2309   NU2309 NJ2309 NUP2309 45 00 36
    NU420 NJ420   17 250 58     NU2310 NJ2310 NUP2310 50 110 40
N2203 NF2200 NU2203 NJ2203 NUP2200 20 40 16     NU2311 NJ2311 NUP2311 55 20 43
N2204 NF2204 NU2204 NJ2204 NUP2204 25 47 18 N2312   NU2312 NJ2312   60 130 46
N2205 NF2205 NU2206 NJ2205 NUP2205 30 52 18 N2313   NU2313 NJ2313   65 40 48
N2206 NF2206 NU2206 NJ2206 NUF2206 35 62 20 N2314   NU2314 NJ2314 NUP2314 70 50 51
N2207 NF2207 NU2207 NJ2207 NUP2207 40 72 23 N2315   NU2315 NJ2315   75 160 55
N2208 NF2208 NU2208 NJ2208 NUP2208 45 80 23 N2316   NU2316 NJ2316   80 170 58
N2209 NF2209 NU2209 NJ2209 NUF2209 50 85 23 N2317   NU2317 NJ2317   85 80 60
N2210 NF2210 NU2210 NJ2210 NUP2210 55 90 23 N2318   NU2318 NJ2318   90 90 64
N2211 NF2211 NU2211 NJ2211 NUF2211 60 00 25 N2319   NU2319 NJ2319   95 200 67
N2212 NF2212 NU2212 NJ2212 NUP2212 65 110 28 N2320   NU2320 NJ2320   00 215 73
N2213 NF2213 NU2213 NJ2213 NUP2213 70 20 31 N2322   NU2322 NJ2322   10 240 80
N2214 NF2214 NU2214 NJ2214 NUP2214 75 125 31                
N2215 NF2215 NU2215 NJ2215 NUP2215 0 30 31                
N2216 NF2216 NU2216 NJ2216 NUP2216 85 140 33                
N2217 NF2217 NU2217 NJ2217 NUP2217 90 50 36                
N2218 NF221 NU2218 NJ2218 NUP2218 95 60 40                
N2219 NF2219 NU2219 NJ2219 NUP221 100 70 43                
N2220 NF2220 NU2220 NJ2220 NUF2220 110 80 46                
N2222 NF2222 NU2222 NJ2222 NUP2222 20 200 53                
N2224 NF2224 NU2224 NJ2224 NUP2224 130 215 58                
N2226 NF2226 NU2226 NJ2226 NUP2226 140 230 64                
    NU2228 NJ2228     250 68                

 Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by ground CZPT on either the inner or outer ring. The cylindrical shape allows the inner ring to have axial movement relative to the outer ring. This is especially important when accommodating thermal expansion, where both rings must be press-fitted.

Cylindrical roller bearings feature high radial load capacity because the rollers and raceway are in linear contact. These bearings are suitable for applications that involve heavy radial and impact loading. They are also appropriate for high-speed applications inasmuch as they can be machined very accurately due to their structure. Having a separable inner or outer ring, these bearings can be easily mounted and dismounted.

 

Detailed Photos

 

OUR PRODUCTS

 

SCOPE OF APPLICATION

 

PRODUCTION PROCESS

PRODUCT PACKAGING

1.industrial packing+industrial cartons+pallets

2.single brand box+brand cartons+pallets

3.follow customer’s requests

A.Plastic Tubes or Single Boxes ( Usually 10pcs in 1 plastic tube for steel bearings);

B.Cartons ( No more than 30kg for 1 carton );

C. Pallet ( Usually more than 400kg totally will use pallet )

D. Delivery time :7-35 days ( by sea or by air )  

Generally,We will choose the most suitable packing method for products. If you have any special requirements for packing, please contact us in advance.

Company Profile

“Reliable quality, competitive prices, and excellent service” have always been our guiding principles. We have implemented a stringent quality control system, starting from raw material procurement to product manufacturing. Our company boasts a strong technical team, well-equipped testing facilities, and a robust ability to develop new products. With a commitment to delivering high-quality products and maintaining a good reputation, we aim to earn the trust of more customers.
ZheJiang Leicester Bearing Technology Co., Ltd. warmly welcomes both new and existing customers for discussions, guidance, and collaboration. We are eager to establish direct sales partnerships with businesses in various industries, both within the country and internationally.
As we embrace our dreams and uphold our values, honesty remains the foundation of our company. ZheJiang Leicester Bearing Technology Co., Ltd. looks forward to creating a bright future together with you!

OUR STRENGTHS

Q1: Can I get some samples?

A: Yes, sample order is available for quality check and market test. But you have to pay the sample cost and express cost. Q2

: Do you receive customized order?

A: Yes, ODM & OEM are welcomed.

Q3: What’s the lead time?

A: According to the order quantity, small order usually need 3-5 days, big order need negotiation.

Q4: What’s your payment terms?

A: We receive Escrow, T/T, West Union, Cash and etc.

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Body: Roller Bearings
The Number of Rows: Single
Outer Dimension: Small and Medium-Sized (60-115mm)
Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

track bearing

What are the considerations for selecting the right track bearings for a particular application?

Selecting the right track bearings for a particular application requires careful consideration of various factors to ensure optimal performance, reliability, and longevity. Here are the key considerations to keep in mind:

  • Load Requirements: Assess the expected load conditions in the application. Consider both the static and dynamic loads that the track bearings will need to support. Determine the maximum load capacity required to ensure that the selected bearings can handle the anticipated loads without premature failure or excessive wear.
  • Speed and Acceleration: Evaluate the speed and acceleration requirements of the application. Higher speeds and rapid accelerations can impose additional stresses on the track bearings. Choose bearings with suitable speed and acceleration ratings to ensure they can operate effectively within the desired range without compromising performance or causing premature wear.
  • Environmental Factors: Consider the operating environment of the application. Evaluate factors such as temperature extremes, moisture, dust, chemicals, and potential exposure to corrosive substances. Select track bearings that are designed to withstand the specific environmental conditions to ensure optimal performance and longevity.
  • Track and Rail Compatibility: Assess the compatibility of the track bearings with the existing track or rail system. Consider factors such as track geometry, dimensional requirements, and mounting options. Ensure that the selected bearings are suitable for the specific track or rail design to facilitate proper installation, alignment, and smooth operation.
  • Maintenance and Lubrication: Evaluate the maintenance and lubrication requirements of the track bearings. Consider factors such as the need for regular maintenance, lubrication intervals, and the availability of suitable lubricants. Choose bearings that align with the desired maintenance practices and provide appropriate lubrication options based on the application’s operational demands.
  • Expected Lifespan and Reliability: Determine the desired lifespan and reliability expectations for the track bearings. Consider factors such as the projected operating hours, duty cycles, and the criticality of the application. Select bearings from reputable manufacturers known for producing high-quality, reliable products that align with the expected lifespan and reliability requirements.
  • Cost Considerations: Evaluate the cost-effectiveness of the track bearings. Consider the initial purchase cost as well as the long-term costs associated with maintenance, replacement, and potential downtime. Strive for a balance between the upfront investment and the overall value provided by the bearings in terms of performance, reliability, and longevity.

It is essential to consult with bearing manufacturers or industry experts who can provide guidance and recommendations based on the specific application requirements. By considering these factors and seeking expert advice, you can select the right track bearings that best meet the needs of your particular application.

track bearing

Can track bearings withstand harsh environments or exposure to contaminants?

Track bearings are designed to operate in a wide range of environments, including harsh conditions and exposure to contaminants. However, the ability of track bearings to withstand such environments depends on their specific design, materials, and protective measures. Here’s a detailed explanation:

Many track bearings are engineered with features that enhance their resistance to harsh environments and contaminants. These features may include:

  • Sealing and Shielding: Some track bearings are equipped with seals or shields that provide a physical barrier against contaminants such as dirt, dust, water, and debris. These seals or shields help prevent the entry of contaminants into the bearing’s internal components, reducing the risk of damage and premature wear.
  • Corrosion Resistance: Track bearings intended for use in corrosive environments are often constructed from materials that offer high corrosion resistance. Stainless steel, for example, is commonly used due to its ability to withstand exposure to moisture, chemicals, and other corrosive substances.
  • Specialized Coatings: Some track bearings may feature specialized coatings or surface treatments that provide additional protection against contaminants and harsh conditions. These coatings can enhance the bearing’s resistance to corrosion, abrasion, and chemical exposure.
  • High-Temperature Capability: Certain track bearings are designed to withstand high-temperature environments. They are typically constructed using heat-resistant materials and lubricants that can maintain their structural integrity and performance even under extreme heat.
  • Environmental Sealing: In applications where track bearings are exposed to extreme conditions, such as underwater or in highly dusty environments, special environmental sealing measures may be employed. These measures can include the use of advanced sealing technologies or the encapsulation of the bearings within protective housings.

While track bearings are designed to withstand harsh environments and exposure to contaminants, it is important to note that their performance and longevity can still be affected over time. Regular maintenance, including cleaning, inspection, and lubrication, is crucial to ensure proper functioning and to mitigate the impact of contaminants on the bearings.

It is recommended to consult the manufacturer’s specifications and guidelines for the track bearings being used in a specific application. Manufacturers often provide information on the environmental ratings and limits of their bearings, helping users determine the suitability of the bearings for particular harsh environments or exposure to contaminants.

By selecting track bearings with appropriate features, materials, and protection, and by implementing proper maintenance practices, it is possible to enhance the bearings’ ability to withstand harsh environments and exposure to contaminants, thereby maximizing their performance and longevity.

track bearing

Can you describe the load-carrying capacity and load ratings of track bearings?

Track bearings are designed to withstand and carry various types of loads while maintaining smooth and controlled motion along a track or guide rail. The load-carrying capacity and load ratings of track bearings are crucial factors to consider when selecting the appropriate bearing for a specific application. Let’s delve into these concepts:

Load-Carrying Capacity:

The load-carrying capacity of a track bearing refers to its ability to support and distribute the applied loads without excessive deformation or failure. It is influenced by several factors, including the bearing’s design, materials, and operating conditions. The load-carrying capacity is typically specified in terms of static load capacity and dynamic load capacity.

The static load capacity indicates the maximum load that a track bearing can support without permanent deformation. It is determined by the bearing’s internal geometry, material strength, and the contact area between the rolling elements and raceways. Static loads are those that do not cause relative motion between the bearing and the track, such as when the bearing is stationary or subjected to a constant load.

The dynamic load capacity represents the maximum load that a track bearing can handle while still allowing smooth rolling motion. It takes into account the bearing’s ability to handle both radial and axial loads and considers factors such as the bearing’s internal clearance, lubrication, and operating speed. Dynamic loads are those that cause relative motion between the bearing and the track, such as when the bearing is subjected to varying loads or subjected to motion along the track.

Load Ratings:

Load ratings provide standardized values that indicate the maximum allowable loads for track bearings based on industry standards. These load ratings are commonly provided by bearing manufacturers and help users select the appropriate bearing for their specific application requirements. The two primary load ratings used for track bearings are the radial load rating and the axial load rating.

The radial load rating specifies the maximum radial load that a track bearing can withstand while maintaining proper performance and service life. It is expressed as a static load rating and a dynamic load rating. The static radial load rating indicates the maximum radial load that the bearing can support without permanent deformation, while the dynamic radial load rating represents the maximum radial load that the bearing can handle under typical operating conditions.

The axial load rating indicates the maximum axial load that a track bearing can withstand without excessive deformation or failure. It considers the applied axial force in the direction perpendicular to the track or guide rail. The axial load rating is typically provided as a static load rating and a dynamic load rating.

It’s important to note that load ratings are based on specific operating conditions, such as a certain speed, lubrication, and temperature. It is necessary to consider the actual operating conditions and factors such as shock loads, vibrations, and misalignments when applying load ratings to real-world applications.

By understanding the load-carrying capacity and load ratings of track bearings, engineers and designers can make informed decisions to ensure reliable and safe performance of the bearings in their applications.

China OEM Ru8509TM Track Roller Ru8509 Cylindrical Roller Bearing for Agricultural Plunger Baler   wheel bearingChina OEM Ru8509TM Track Roller Ru8509 Cylindrical Roller Bearing for Agricultural Plunger Baler   wheel bearing
editor by CX 2024-05-14

China Custom CZPT CZPT CZPT Inch Series Cam Follower Cr8-1 Vbuu /Cr8-1 Vbuur Track Roller Bearing bearing example

Product Description

THK CZPT CZPT Inch Series Cam Follower CR8-1 Vbuu /CR8-1 Vbuur Track Roller Bearing 

NO 1. our adwantages

1. 30 years bearing products manufacturing and exporting experiences.
2. OEM order and non-standard bearing order can be accepted.
3. Many sizes of bearing are available. Large quantity bearing can be provided.
4. To respect customers, you can choose the loading port.
5. A certain number of free sample can be provide to support our customer’s after-sale services and warranty.

NO 2. OEM all brand bearing

NO 3. Cylindrical roller bearing Specification: 

Seals Types OPEN
Vibration Level Z1V1,Z2V2,Z3V3
Clearance C2,C0,C3,C4,C5
Tolerance Codes ABEC-1,ABEC-3,ABEC-5
Materral GCr15-China/AISI52100-USA/Din100Cr6-Germany
MOQ 1Set at least
Delivery Time Stock or 5-15 days after contract
Payment Terms TT/PAPAL/WESTERN UNION
Package Tube package+outer carton+pallets;
Single box+outer carton+pallets;
Tube packge+middle box+outer carton+pallets;
According to your requirement

NO 3. Rolling Mill Bearing Models and Size:   
 

Model D d H
KR16-PP 16 6 28
KR16-SK-PP 16 6 28
KR19-PP 19 8 32
KR19-SK-PP 19 8 32
KR22-PP 22 10 36
KR26-PP 26 10 36
KR30-PP 30 12 40
KR32-PP 32 12 40
KR35-PP 35 16 52
KR40-PP 40 18 58
KR47-PP 47 20 66
KR52-PP 52 20 66
KR62-PP 62 24 80
KR72-PP 72 24 80
KR80-PP 80 30 100
KR90-PP 90 30 100
KR16 16 6 28
KR19 19 8 32
KR22 22 10 36
KR26 26 10 36
KR30 30 12 40
KR32 32 12 40
KR35 35 16 52
KR40 40 18 58
KRE16-PP 16 9 28
KRE19-PP 19 11 32
KRE22-PP 22 13 36
KRE26-PP 26 13 36
KRE30-PP 30 15 40
KRE32-PP 32 15 40
KRE35-PP 35 20 52
KRE40-PP 40 22 58
KRE47-PP 47 24 66
KRE52-PP 52 24 66
KRE62-PP 62 28 80
KRE72-PP 72 28 80
KRE80-PP 80 35 100
KRE90-PP 90 35 100
KRV16-PP 16 6 28
KRV19-PP 19 8 32
KRV22-PP 22 10 36
KRV26-PP 26 10 36
KRV30-PP 30 12 40
KRV32-PP 32 12 40
KRV35-PP 35 16 52
KRV40-PP 40 18 58
KRV47-PP 47 20 66
KRV52-PP 52 20 66
KRV62-PP 62 24 80
KRV72-PP 72 24 80
KRV80-PP 80 30 100
KRV90-PP 90 30 100
NUKR35 35 16 52
NUKR40 40 18 58
NUKR47 47 20 66
NUKR52 52 20 66
NUKR62 62 24 80
NUKR72 72 24 80
NUKR80 80 30 100
NUKR90 90 30 100
NUKRE35 35 20 52
NUKRE40 40 22 58
NUKRE47 47 24 66
NUKRE52 52 24 66
NUKRE62 62 28 80
NUKRE72 72 28 80
NUKRE80 80 35 100
NUKRE90 90 35 100
PWKR35-2RS-XL 35 16 52
PWKR40-2RS-XL 40 18 58
PWKR47-2RS-XL 47 20 66
PWKR52-2RS-XL 52 20 66
PWKR62-2RS-XL 62 24 80
PWKR72-2RS-XL 72 24 80
PWKR80-2RS-XL 80 30 100
PWKR90-2RS-XL 90 30 100
PWKR35-2RS-RR-XL 35 16 52
PWKR40-2RS-RR-XL 40 18 58
PWKR47-2RS-RR-XL 47 20 66
PWKR52-2RS-RR-XL 52 20 66
PWKR62-2RS-RR-XL 62 24 80
PWKR72-2RS-RR-XL 72 24 80
PWKR80-2RS-RR-XL 80 30 100
PWKR90-2RS-RR-XL 90 30 100
PWKRE35-2RS 35 20 52
PWKRE40-2RS 40 22 58
PWKRE47-2RS 47 24 66
PWKRE52-2RS 52 24 66
PWKRE62-2RS 62 28 80
PWKRE72-2RS 72 28 80
PWKRE80-2RS 80 35 100
PWKRE90-2RS 90 35 100

Why choose us ?
 
1. Quality Control To ensure the quality of our vehicles and other products, Our QC staffs do strict supplier evaluations, in-coming inspections, in-process inspections, final inspections and pre-delivery inspections. The most important is that we listen to what our customers say and are always looking for ways to improve the quality of our products through continuous improvement.

2. OEM Ability We have built stable and long-term cooperate relationshilp with supermarkets,we canalso provide ODM, OEM and Agent services to our customers over the world.

3. Parts Available We have spare bearings for immediate delivery to anywhere in the world. Our Bearings widely used in the fields of motor, fan, injection molding machine, mining, mechanical equipment, metallurgy, rolling, automobile, railway, iron and steel, power, textile, packaging, petroleum, paper making, etc

4. Good Warranty We take customer satisfaction and product quality as the first priority for us. We supply reliable warranties and good after-sales services.

 
1. Quality Control To ensure the quality of our vehicles and other products, Our QC staffs do strict supplier evaluations, in-coming inspections, in-process inspections, final inspections and pre-delivery inspections. The most important is that we listen to what our customers say and are always looking for ways to improve the quality of our products through continuous improvement.

2. OEM Ability We have built stable and long-term cooperate relationshilp with supermarkets,we canalso provide ODM, OEM and Agent services to our customers over the world.

3. Parts Available We have spare bearings for immediate delivery to anywhere in the world. Our Bearings widely used in the fields of motor, fan, injection molding machine, mining, mechanical equipment, metallurgy, rolling, automobile, railway, iron and steel, power, textile, packaging, petroleum, paper making, etc

4. Good Warranty We take customer satisfaction and product quality as the first priority for us. We supply reliable warranties and good after-sales services.

F A Q

*Q:Can I get samples from you?
A:We are honored to offer you samples for quality check.

*Q:What parts are manufactured by you?
A: :90% of bearings are manufactured by us.  

*Q:What’s the leading time? (How long do you need to prepare my goods?)
A:10 days for sample orders. 30 days for mass production orders (based on different quantities)

*Q:How long do I need to wait before my goods arrive?
A:3-5 days for international express. 5-7 days for air transportation, 35-40 days for sea transportation.

*Q:Can you put my brand name (logo) on these products?
A: Yes, or container order. Sticker order qty over 100pcs.

*Q:What payment methods do you accept?
A:T/T, L/C, Western Union, etc.

*Q:What certificates do you have?
A: All of our products are with CE IAF certificate. For some models, the certificates are already available. For other models, we will need your assistance to apply the certificates. For some models, the certificates are already available. For other models, we will need your assistance to apply the certificates.

*Q:What is your product quality?
A:Our raw materials are purchased from qualified suppliers. And we have a strong quality control team to guarantee our quality. We always care what you care!!

*Q:What is your warranty?
A:Our warranty is 24 months after delivery. We always pay high attention to after sale service!! For those out of warranty, we have adequate parts.
Electrical and easy wear parts are not included in warranty range.

*Q:How are parts availability?
A:We keep stock of spare parts and make sure all parts available whenever you need.
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Aligning: Non-Aligning Bearing
Separated: Separated
Rows Number: Single
Load Direction: Radial Bearing
Material: Bearing Steel
Outer Dimension: Micro(≤26mm)
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

track bearing

Can track bearings be customized or modified for specific track or linear motion applications?

Yes, track bearings can be customized or modified to meet specific requirements of track or linear motion applications. Manufacturers often offer a range of options and capabilities to tailor track bearings to the unique needs of different industries and applications. Here are some ways in which track bearings can be customized or modified:

  • Size and Dimensional Variations: Track bearings can be customized in terms of size, diameter, width, and overall dimensions to fit specific track or linear motion systems. Manufacturers can provide bearings with varying sizes and load capacities to accommodate different application requirements.
  • Material Selection: Track bearings can be manufactured from various materials depending on the specific application’s demands. Common materials include steel, stainless steel, ceramic, and polymer composites. Material selection can be customized to achieve desired properties such as corrosion resistance, high temperature tolerance, or low friction.
  • Sealing and Protection: In applications where track bearings are exposed to contaminants, moisture, or harsh environments, customized sealing and protection features can be added. These may include additional seals, shields, or coatings to enhance the bearing’s resistance to dust, water, chemicals, or extreme temperatures.
  • Lubrication Options: While self-lubricating or maintenance-free track bearings offer convenience, applications with specific lubrication requirements may benefit from customized lubrication options. Manufacturers can modify the bearing design to accommodate external lubrication systems or provide alternative lubrication methods to meet the unique demands of the application.
  • Specialized Load and Speed Ratings: In certain applications, track bearings may need to handle exceptionally high loads or operate at high speeds. Manufacturers can customize the bearing design to offer specialized load and speed ratings to ensure optimal performance and reliability in such demanding conditions.
  • Mounting and Attachment Options: Track bearings can be customized with different mounting and attachment options to facilitate easy installation and integration into specific track or linear motion systems. This may include variations in bolt hole patterns, flange designs, or specialized mounting arrangements.
  • Track Geometry Compatibility: Track bearings can be designed or modified to match specific track or guide rail geometries. This ensures proper fit, alignment, and smooth operation along the designated track, minimizing the risk of misalignment or issues related to track compatibility.

It is important to work closely with bearing manufacturers or suppliers to discuss the specific requirements of the track or linear motion application. By collaborating with experts, it is possible to customize or modify track bearings to optimize performance, reliability, and longevity in a wide range of applications.

track bearing

Can track bearings withstand harsh environments or exposure to contaminants?

Track bearings are designed to operate in a wide range of environments, including harsh conditions and exposure to contaminants. However, the ability of track bearings to withstand such environments depends on their specific design, materials, and protective measures. Here’s a detailed explanation:

Many track bearings are engineered with features that enhance their resistance to harsh environments and contaminants. These features may include:

  • Sealing and Shielding: Some track bearings are equipped with seals or shields that provide a physical barrier against contaminants such as dirt, dust, water, and debris. These seals or shields help prevent the entry of contaminants into the bearing’s internal components, reducing the risk of damage and premature wear.
  • Corrosion Resistance: Track bearings intended for use in corrosive environments are often constructed from materials that offer high corrosion resistance. Stainless steel, for example, is commonly used due to its ability to withstand exposure to moisture, chemicals, and other corrosive substances.
  • Specialized Coatings: Some track bearings may feature specialized coatings or surface treatments that provide additional protection against contaminants and harsh conditions. These coatings can enhance the bearing’s resistance to corrosion, abrasion, and chemical exposure.
  • High-Temperature Capability: Certain track bearings are designed to withstand high-temperature environments. They are typically constructed using heat-resistant materials and lubricants that can maintain their structural integrity and performance even under extreme heat.
  • Environmental Sealing: In applications where track bearings are exposed to extreme conditions, such as underwater or in highly dusty environments, special environmental sealing measures may be employed. These measures can include the use of advanced sealing technologies or the encapsulation of the bearings within protective housings.

While track bearings are designed to withstand harsh environments and exposure to contaminants, it is important to note that their performance and longevity can still be affected over time. Regular maintenance, including cleaning, inspection, and lubrication, is crucial to ensure proper functioning and to mitigate the impact of contaminants on the bearings.

It is recommended to consult the manufacturer’s specifications and guidelines for the track bearings being used in a specific application. Manufacturers often provide information on the environmental ratings and limits of their bearings, helping users determine the suitability of the bearings for particular harsh environments or exposure to contaminants.

By selecting track bearings with appropriate features, materials, and protection, and by implementing proper maintenance practices, it is possible to enhance the bearings’ ability to withstand harsh environments and exposure to contaminants, thereby maximizing their performance and longevity.

track bearing

How do track bearings compare to other types of bearings like ball bearings or roller bearings?

Track bearings, ball bearings, and roller bearings are all types of rolling bearings used in various applications. Let’s compare track bearings to ball bearings and roller bearings to understand their similarities and differences:

  • Design and Construction: Track bearings, ball bearings, and roller bearings have different designs and constructions. Track bearings, also known as track rollers or track follower bearings, are designed specifically for guided linear or rotational motion along a track or guide rail. They feature an outer ring with a track surface, an inner ring, rolling elements (such as rollers or needles), and a cage. Ball bearings, on the other hand, have spherical rolling elements (balls) sandwiched between inner and outer rings. Roller bearings, as the name suggests, have cylindrical or tapered rolling elements (rollers) between inner and outer rings.
  • Motion and Load Handling: Track bearings are primarily used for guided motion in track-based systems, while ball bearings and roller bearings are used for general rotational or linear motion. Track bearings are designed to support both radial and axial loads and provide smooth and controlled motion along the track. Ball bearings and roller bearings are also capable of supporting radial and axial loads but are typically used in applications where the motion is not constrained to a specific track or guide rail. Roller bearings, with their larger contact area and higher load-carrying capacity, are often preferred for applications with higher loads.
  • Applications: Track bearings are commonly used in applications such as material handling systems, conveyors, cam mechanisms, automated machinery, construction equipment, and agricultural machinery, where guided motion along a track or rail is required. Ball bearings and roller bearings find applications in a wide range of industries and systems, including electric motors, pumps, automotive applications, industrial machinery, and appliances.
  • Friction and Efficiency: Track bearings, ball bearings, and roller bearings all aim to minimize friction and ensure efficient operation. However, due to their different designs and contact surfaces, they exhibit varying levels of friction. Ball bearings typically have lower friction due to point contact between the balls and the raceways. Roller bearings, especially tapered roller bearings, distribute the load over a larger contact area, resulting in slightly higher friction compared to ball bearings. Track bearings, with their track interface, may have slightly higher friction compared to ball bearings or roller bearings due to the rolling elements’ contact with the track surface.
  • Installation and Maintenance: Track bearings, ball bearings, and roller bearings require proper installation and maintenance for optimal performance and longevity. However, track bearings may require additional attention during installation as they need to be properly aligned with the track or guide rail. Regular lubrication and periodic inspection are essential for all types of bearings to ensure smooth operation and prevent premature failure.

In summary, track bearings, ball bearings, and roller bearings have distinct designs and applications. Track bearings are specialized for guided motion along a track or rail, while ball bearings and roller bearings are more versatile and used in a wide range of rotational or linear motion applications. Each type of bearing has its advantages and considerations in terms of load handling, friction, efficiency, and installation requirements. Selecting the appropriate bearing type depends on the specific application requirements, load conditions, motion characteristics, and environmental factors.

China Custom CZPT CZPT CZPT Inch Series Cam Follower Cr8-1 Vbuu /Cr8-1 Vbuur Track Roller Bearing   bearing exampleChina Custom CZPT CZPT CZPT Inch Series Cam Follower Cr8-1 Vbuu /Cr8-1 Vbuur Track Roller Bearing   bearing example
editor by CX 2024-05-14

China Custom Needle Roller Bearing Supplier Nutr20A Nutr20X Track Roller Bearing for Machinery Using bearing driver

Product Description

More model of Needle Roller Bearing 

Related Information

NEEDLE ROLLER BEARINGS
SERIES INNER DIAMETER
K Series 3mm-130mm
HK Series 3mm-60mm
SCE Series 0.125-3.500
BK Series 3mm-60mm
BCE Series 0.125-3.500
HF Series 4mm-35mm
HFL Series 8mm-35mm
NK Series 5mm-100mm
NKI Series 5mm-100mm
NA4900 Series 10mm-100mm
RNA4900 Series 10mm-100mm
NA6900 Series 10mm-100mm
RNA6900 Series 10mm-100mm
AXK Series 6mm-160mm
AS Series 6mm-160mm

  Drawn cup needle roller bearings        
  Bearing Number Boundary dimensions(mm) Basic load ratings(N) Limiting speeds(rpm) Mass(g)
    Fw D C Cr Cor Oil (Approx.)
HK Series HK0408TN 4 8 8 1540 1070 4000 1.6
  HK0509 5 9 9 2200 1790 36000 2
  HK05X09X08 5 9 8 2200 1790 36000 1.9
  HK0607 6 10 7 1600 1400 30000 1.8
  HK0608 6 10 8 1830 1550 32000 2.1
  HK0609 6 10 9 2650 2400 3000 2.2
  HK0611 6 10 11 1700 1500 29000 2.3
  HK06X12X08 6 12 8 2230 2571 33000 2.5
  HK0708 7 11 8 2800 2150 27000 2.2
  HK0709 7 11 9 2800 2150 27000 2.3
  HK07X12X08 7 12 8 3300 3220 37000 2.2
  HK07X12X09 7 12 9 3400 3150 37000 2.4
  HK0808 8 12 8 2550 2400 21000 2.7
  HK571 8 12 10 3700 3450 21000 3
  HK08X14X10 8 14 10 3800 3950 25000 5.35
  HK08X14X12 8 14 12 4100 4320 25000 6.6
  HK 0571 9 13 8 3650 4050 25000 3
  HK571 9 13 10 4050 4250 25000 4
  HK571 9 13 11 4300 4700 25000 4.1
  HK571 9 13 12 5000 6000 25000 4.6
  HK09X15X10 9 15 10 5300 6300 25000 5.6
  HK1571 10 14 10 3900 4800 19000 4.1
  HK1012 10 14 12 5000 6300 19000 4.8
  HK1015 10 14 15 6700 7800 19000 6
  HK10X13X08 10 13 8 4100 4800 20000 3.5
  HK10X15X15 10 15 15 6800 8800 18000 6.5
  HK10X16X10 10 16 10 6800 8800 18000 6.5
  HK10X16X12 10 16 12 6800 8800 18000 7.5
  HK10X16X15 10 16 15 6800 8800 19000 11
  HK10X17X15 10 17 15 7200 8000 19000 11.5
  HK10X18X12 10 18 12 7200 8000 19000 8.5
  HK1208 12 16 8 7200 8000 19000 3.3
  HK1210 12 16 10 4150 5800 19000 4.6
  HK1212 12 16 12 3800 5100 15000 5.6
  HK12X17X12 12 17 12 5100 7000 15000 7.5
  HK12X17X15 12 17 15 5100 7000 15000 9.5
  HK12X17X18 12 17 18 5100 7000 15000 11
  HK12X18X12 12 18 12 5500 6300 17000 9.1
  HK12X18X14 12 18 14 6500 6300 15000 10.6
  HK12X19X12 12 19 12 6800 7400 15000 10
  HK1311 13 19 11 6300 6300 14000 8.5
  HK1312 13 19 12 6200 7100 17000 8.9
  HK13.5X20X12 13.5 20 12 6250 7590 16000 10.8
  HK1410 14 20 10 6700 7000 16000 8.3
  HK1412 14 20 12 6800 7500 16000 10.5
  HK1416 14 20 16 7300 9000 14000 13.9
  HK1512 15 21 12 7000 8400 14000 11.1
  HK1514 15 21 14 8500 10400 13000 12.7
  HK1515 15 21 15 9100 11400 13000 14.2
  HK1516 15 21 16 9800 11400 14000 15
  HK1522 15 21 22 10400 16500 14000 20.4
  HK15X20X12 15 20 12 5800 6000 14000 8.4
  HK15X20X16 15 20 16 6000 6200 14000 11.4
  HK15X20X20 15 20 20 6100 6400 14000 13.8
  HK15X22X12 15 22 12 14300 18400 13000 12.5
  HK15X22X12.5 15 22 12.5 14300 18400 13000 13.5
  HK1614 16 22 14 8800 9900 12000 14.4
  HK1616 16 22 16 15710 14300 14000 15.8
  HK1617 16 22 17 12900 17200 12000 18
  HK1622 16 22 22 11100 17400 14000 21.7
  HK16X21X06 16 21 6 4200 5300 12000 5.5
  HK16X21X09 16 21 9 4400 5600 12000 7.5
  HK1612 16 22 12 7100 9200 14000 11.7
  HK1712 17 23 12 6900 9300 13000 12.2
  HK1714 17 23 14 6800 15710 10000 14
  HK1716 17 23 16 8500 12500 10000 15.9
  HK1718 17 23 18 9500 10600 10000 19
  HK17X21.5X15 17 21.5 15 6300 8600 11000 10
  HK17X24X15 17 24 15 11200 12800 10000 17
  HK17X25X14 17 25 14 13100 14700 10000 17.7
  HK17X25X15.5 17 25 15.5 9320 10400 10000 20
  HK17X25X18 17 25 18 9500 10600 11000 23.5
  HK17X25X18-RS  17 25 18 10500 12600 13000 23.5
  HK1812 18 24 12 7100 9900 12000 13.1
  HK1816 18 24 16 106500 15300 12000 17.5
  HK19X27X16 19 27 16 8100 9500 10500 23
  HK2571 20 26 10 5900 7200 10000 11.8
  HK2011 20 26 11 7500 9200 9000 12
  HK2012 20 26 12 7600 15710 10000 14.1
  HK2014 20 26 14 9700 18100 9000 15.7
  HK2016 20 26 16 11700 29100 10000 19.3
  HK2018 20 26 18 7900 12800 9000 23.3
  HK2571 20 26 20 13700 24000 10000 24.1
  HK2571 20 26 25 9100 14800 9900 28
  HK2030 20 26 30 21800 40000 15710 34.7
  HK20X27X18 20 27 18 26000 47200 9900 78
  HK20X27X20 20 27 20 26300 47800 9900 82
  HK20X27X30 20 27 30 28500 48800 9900 94
  HK20X28X16 20 28 16 29600 49800 9900 28.5
  HK20X29X18 20 29 18 30900 54600 9900 41
  HK2210 22 28 10 7200 9500 1571 12.3
  HK2212 22 28 12 8100 10400 1571 15
  HK2216 22 28 16 11400 18100 1571 20.9
  HK2220 22 28 20 14500 25000 1571 26.2
  HK2230 22 28 30 17500 30400 9000 32
  HK22X28X7.5TN 22 28 7.5 5200 7000 1571 8.8
  HK22X29X25 22 29 25 18100 31500 9000 37
  HK22X29X30 22 29 30 19400 33100 9000 43
  HK22X30X14 22 30 14 19800 34000 9000 21.9
  HK24X30X7.5TN 24 30 7.5 5800 7200 10000 10.6
  HK2512 25 32 12 10000 14200 9000 20
  HK2514 25 32 14 13600 18700 9000 21.9
  HK2516 25 32 16 13600 20000 9000 27.3
  HK2518 25 32 18 17500 25800 9000 28.2
  HK2520 25 32 20 17900 30000 9000 34.1
  HK2525 25 32 25 22200 36700 9000 40
  HK2526 25 32 26 22500 42000 9000 44.8
  HK2538 25 32 38 30000 58000 9000 64.7
  HK25X33X10 25 33 10 34800 69600 9000 17
  HK25X33X15 25 33 15 35700 70000 9000 27.4
  HK25X35X20 25 35 20 36100 78650 9000 44.9
  HK2816 28 35 16 15400 22500 8700 30.1
  HK2818 28 35 18 18500 29300 8700 31.7
  HK2820 28 35 20 18900 32000 8700 37.6
  HK3012 30 37 12 15710 16200 8100 24
  HK3016 30 37 16 15200 27000 8100 32
  HK3018 30 37 18 19200 31500 8100 33.6
  HK3571 30 37 20 19700 33500 8100 40.1
  HK3026 30 37 26 24000 50000 8100 52.9
  HK3038 30 37 38 32500 74000 8100 76.1
  HK30X38X12 30 38 12 38100 80000 8100 28
  HK30X38X16 30 38 16 39000 82000 8100 32.7
  HK30X38X24 30 38 24 39910 88800 8100 49
  HK30X38X32 30 38 32 38890 88700 8100 69
  HK3224 32 38 24 25500 52000 7300 50.7
  HK3232 32 39 32 22600 54300 7100 66.4
  HK32X38X11 32 38 11 19700 43200 7800 17
  HK32X40X32 32 39 32 27990 59890 7100 72.7
  HK3512 35 40 12 12100 19300 7100 27.7
  HK3516 35 42 16 15700 27500 7100 36.9
  HK3520 35 42 20 20800 41000 7100 46.1
  HK35X43X16 35 42 16 24200 47100 7100 37
  HK35X43X25 35 42 25 24440 48200 6200 60.5
  HK35X43X32 35 43 32 24870 48880 6200 80
  HK35X45X12 35 45 12 24870 48880 6200 31
  HK36X42X12 36 42 12 15000 21000 6200 23
  HK38X48X30 38 48 30 16100 24100 6000 102
  HK4012 40 47 12 14000 24300 6300 31.1
  HK4016 40 47 16 20000 38500 6300 41.4
  HK4571 40 47 20 25500 52000 6300 51.8
  HK40X50X32 40 50 32 23000 42000 6000 114.3
  HK40X50X38 40 50 38 24100 43000 6000 130.8
  HK4512 45 52 12 12900 22500 5800 34.8
  HK4516 45 52 16 19300 3800 5800 46.2
  HK4520 45 52 20 22000 51000 5800 56
  HK45X55X38 45 55 38 27600 61000 5300 135
  HK5012 50 58 12 23600 57200 5300 44.2
  HK5571 50 58 20 28000 60000 5300 72
  HK5571 50 58 25 34500 80000 5300 90.1
  HK50X57X16 50 57 16 15200 32500 5300 51.2
  HK50X60X38 50 60 38 27770 63100 4600 140
  HK5520 55 63 20 29500 59900 4600 78
  HK5525 55 63 25 33200 69980 4600 109
  HK5528 55 63 28 39090 98000 4600 111
  HK6012 60 68 12 12400 29000 4100 49.2
  HK6571 60 68 20 30500 72000 4100 86
  HK6032 60 68 32 50000 131000 4100 136
BK Series BK0408TN 4 8 8 1540 1070 40000 1.8
  BK0509 5 9 9 2200 1790 36000 2.1
  BK0608 6 10 8 1830 1550 32000 2.2
  BK0609 6 10 9 2650 2400 3000 2.6
  BK0709 7 11 9 2800 2150 27000 2.9
  BK0808 8 12 8 2550 2400 21000 3
  BK571 8 12 10 3700 3450 21000 3.4
  BK08X14X10 8 14 10 3800 3950 25000 5.8
  BK 0571 9 13 8 3650 4050 25000 3.4
  BK571 9 13 10 4050 4250 25000 4.3
  BK571 9 13 12 5000 6000 25000 4.9
  BK1571 10 14 10 3900 4800 19000 4.3
  BK1012 10 14 12 5000 6300 19000 5
  BK1015 10 14 15 6700 7800 19000 6.2
  BK10X16X10 10 16 10 6800 8800 18000 6.8
  BK1210 12 16 10 4150 5800 19000 5.2
  BK1212 12 16 12 3800 5100 15000 6.2
  BK12X18X12 12 18 12 5500 6300 17000 10.3
  BK1312 13 19 12 6200 7100 17000 11.2
  BK1410 14 20 10 6700 7000 16000 12.1
  BK1512 15 21 12 7000 8400 14000 12.7
  BK1515 15 21 15 9800 11400 14000 15.3
  BK1516 15 21 16 9800 11400 14000 16.5
  BK1522 15 21 22 10400 16500 14000 22
  BK1612 16 22 12 7100 9200 14000 13.8
  BK1616 16 22 16 15710 14300 14000 17.6
  BK1622 16 22 22 11100 17400 14000 23.4
  BK1712 17 23 12 6900 9300 136000 14.5
  BK1812 18 24 12 7100 9900 12000 14.9
  BK1816 18 24 16 10600 15300 12000 19.9
  BK2571 20 26 10 5900 7200 10000 14
  BK2012 20 26 12 7600 15710 10000 16.7
  BK2016 20 26 16 11700 29100 10000 22.3
  BK2571 20 26 20 13700 24000 10000 27.1
  BK2030 20 26 30 21800 40000 15710 37.4
  BK2212 22 28 12 8100 10400 1571 18.1
  BK2216 22 28 16 11400 18100 1571 24.3
  BK2220 22 28 20 14500 25000 1571 29.9
  BK2512 25 32 12 10000 14200 9000 23.2
  BK2516 25 32 16 13600 50000 9000 31
  BK2520 25 32 20 17900 30000 9000 38.7
  BK2526 25 32 26 22500 42000 9000 49
  BK2538 25 32 38 30000 58000 9000 69
  BK2816 28 35 16 15400 22500 8700 34.1
  BK2820 28 35 20 18900 32000 8700 43
  BK3012 30 37 12 15710 16200 8100 27.9
  BK3016 30 37 16 15200 27000 8100 37.1
  BK3571 30 37 20 19700 33500 8100 46.5
  BK3026 30 37 26 24000 50000 8100 59.4
  BK3038 30 37 38 32500 74000 8100 82.5
  BK3512 35 42 12 12100 19300 7100 32.9
  BK3516 35 42 16 15700 27500 7100 43.8
  BK3520 35 42 20 20800 41000 7100 54.8
  BK4012 40 47 12 14000 24300 6300 38.2
  BK4016 40 47 16 20000 38500 6300 51
  BK4571 40 47 20 25500 52000 6300 62
  BK4516 45 52 16 19300 38000 5800 56
  BK4520 45 52 20 22000 51000 5800 72
  BK4512 45 52 12 12900 22500 5800 45
  BK5571 50 58 20 28000 60000 5300 87.3
  BK5571 50 58 25 34500 80000 5300 109
  BK5520 55 63 20 29500 59900 4600 93.8
  BK5528 55 63 28 39090 98000 4600 132
  BK6012 60 68 12 12400 29000 4100 77
  BK6571 60 68 20 30500 72000 4100 105
  BK6032 60 68 32 50000 131000 4100 164
BA Series BA55 7.94 12.7 7.92 1917 1703 38400 3.4
  BHA68 9.52 15.88 12.77 6004 6093 30000 5
  BA87 12.7 17.46 11.13 1976 2500 18000 6.6
  BA1210 19.05 25.4 15.88 11386 16413 16000 16
  BA1212 19.05 25.4 19.05 14144 21706 16000 21
  BA1816 22.22 34.92 25.4 20700 34500 13000 29
SCE Seires SCE1012 15.88 22.22 19.05 10800 13440 18000 20
  SCE108 15.88 22.22 12.7 8559 12060 18000 12
  SCH1012 15.88 22.22 19.05 10800 13440 18000 20
  SCE1212 19.05 25.4 19.05 14144 21706 16000 21
  SCE1214PP 19.05 25.4 22.22 16140 23800 16000 23
  SCE1616PP 25.4 31.75 25.4 22729 43505 11000 44
M Series M-681 9.52 14.29 12.7 4581 5515 29900 4.3
55 Series 55000X22 19.05 30.17 47.6 18000 25000 16000 36
HK-RS Series HK571-RS 8 12 10 2250 2100 19000 2.9
  HK09X13X12-RS 8 13 12 3800 4300 19000 4
  HK1012-RS 10 14 12 4100 5000 19000 4.2
  HK1214-RS 12 18 14 6100 7000 15000 10.7
  HK13X19X12-RS 13 19 12 6800 7580 12000 8.9
  HK1414-RS 14 20 14 6100 7500 13000 12
  HK1514-RS 15 21 14 6800 8800 11000 12.6
  HK1518-RS 15 21 18 9500 11400 10000 16
  HK1614-RS 16 22 14 7200 9200 10000 15.1
  HK17X25X14-RS 17 25 14 8000 9800 10000 17.7
  HK17X25X15.5-RS 17 25 15.5 9320 10400 13000 20
  HK17X25X20-RS 17 25 20 11600 13200 13000 26.2
  HK1814-RS 18 24 14 7800 9900 13000 15.1
  HK2012-RS 20 26 12 9500 11900 9200 11.7
  HK2018-RS 20 26 18 12700 25710 8200 21.4
  HK20X29X18-RS 20 29 18 8700 9980 7800 28.8
  HK2212-RS 22 28 12 8310 10000 9000 14
  HK2214-RS 22 28 14 9000 12400 7800 18.3
  HK2218-RS 22 28 18 10400 25710 7800 23.5
  HK2518-RS 25 32 18 13600 20000 6900 31
  HK3018-RS 30 37 18 16200 26000 5300 36.6
  HK3518-RS 35 42 18 16700 30500 4900 37.4
  HK4018-RS 40 47 18 19000 30500 4200 47.3
  HK4518-RS 45 52 18 20300 41000 3800 54.2
  HK5571-RS 50 58 24 30000 61000 3200 77.2
HK-2RS Series HK571-2RS 8 12 12 2250 2100 19000 3.5
  HK1014-2RS 10 14 14 4100 5000 15000 5.2
  HK1216-2RS 12 18 16 6100 7000 12000 11.5
  HK1416-2RS 14 20 16 6100 7500 11000 14
  HK1516-2RS 15 21 16 6800 8800 10000 14.3
  HK1520-2RS 15 21 20 9500 11400 10000 18
  HK1616-2RS 16 22 16 7200 9200 10000 15.1
  HK1620-2RS 16 22 20 9900 12300 10000 16.8
  HK1625-2RS 16 22 25 9900 12300 10000 17
  HK1816-2RS 18 24 16 7800 9900 9200 17
  HK2016-2RS 20 26 16 8000 15710 9000 18.8
  HK2571-2RS 20 26 20 12700 25710 7800 23.5
  HK2216-2RS 22 28 16 9000 12400 7800 20.3
  HK2220-2RS 22 28 20 10400 25710 7800 25.5
  HK2516-2RS 25 32 16 9800 13200 6900 27.3
  HK2520-2RS 25 32 20 13600 20000 6900 33.1
  HK2524-2RS 25 32 24 17900 30000 6900 39.7
  HK2530-2RS 25 32 30 24500 43000 6900 47.3
  HK2820-2RS 28 35 20 11400 22500 5300 36.9
  HK3016-2RS 30 37 16 15710 16200 5300 28.5
  HK3571-2RS 30 37 20 16200 26000 5300 39.1
  HK3571-2RS 30 37 24 21000 38500 5300 49.7
  HK3516-2RS 35 42 16 15710 20300 4900 36.4
  HK3520-2RS 35 42 20 16700 30500 4900 41.1
  HK4016-2RS 40 47 16 11000 21300 4200 41.2
  HK4571-2RS 40 47 20 19000 30500 4200 50.2
  HK4520-2RS 45 52 20 20300 41000 3800 57.4
  HK5571-2RS 50 58 24 30000 61000 3200 84
HK-RS Series BK1414-RS 14 20 14 6100 7500 11000 14.1
  BK1514-RS 15 21 14 6800 8800 10000 14.4
  BK1614-RS 16 22 14 7200 9200 10000 15.3
  BK2018-RS 20 26 18 12700 25710 7800 24.4
  BK2518-RS 25 32 18 13600 20000 6900 35.3

 

Needle bearings are a small cylindrical type of roller bearings which are used to prevent friction between moving surfaces which have low rotational speeds. Needle roller bearings are usually used when space is at a premium as needle bearings are much more compact than ball bearings.This type of bearing is known for its smaller, rigid and more durable design, offering a smaller coefficient of friction, allowing them to transfer motion on rotating surfaces easily.

Product ttrb

 

Pro

 

 

Needle rollers are the load-carrying component of the bearing, and are the 1 common component of all needle roller bearing types. These allow the outer and inner rings to rotate almost friction-free. They are most frequently manufactured from a steel alloy.

 

Raceways (if present) serve to CZPT the rollers within the bearing. These items are commonly manufactured from carbon chromium steel or other alloys to improve hardness, fatigue resistance, and dimensional stability.

 

Bearing cages separate rollers to keep the load evenly distributed around the bearing. They also reduce bearing noise, improve rolling conditions, and prevent sliding. Additionally, they contain rollers within a single assembly. Steel is the most commonly used cage material in needle roller bearings. Plastic cages can be used where operating conditions permit. Lubrication and surface treatments can reduce the amount of heat generated from friction. Some drawn cup needle roller bearings are designed without a cage, and contain a full complement of needle rollers.

 

Needle Roller Bearings Applications

Needle roller bearings are used in a variety of applications, such as radial piston pumps, autmotive steering and braking systems, power tools, transmissions, engines, valve trains, copiers, fax machines, outboard engines, and lawn trimmers.

 

Packaging & Shipping

Please contact us for more pictures of different packing.

Universal Packing

Without any logo on bearings or packing.

JDZ Packing

With our brand JDZ on bearings and packing.

Customized Packing

Depends on buyer’s requirements.

Original Brand Packing

Bearing and packing are both original. Please contact us for pictures.

 
 

QUALITY ASSURANCE

100% Quality inspection to ensure the bearings are with good quality before shipping. 

Company Profile

 

 

ZheJiang CZPT Precision Bearing Co.,Ltd. was founded by ZheJiang Defa Bearing Co.,Ltd, factory is located in ZheJiang province, China. 
We are a bearing manufacturer integrating the research, development and sales of bearings, with a floor area of 18,000 square meters and a plant area of 8,800 square meters. Equipped with modern production equipment and advanced detection instruments. 

We can provide all types bearings and OEM service according to customers’ requirements. 

Our products are widely used in the automobile, agricultural, textile production, mining, printing and packing industries, in addition to various applications at airports, in air-conditioning systems, conveying devices, ships ad so on. Our products are being exported to more than 50 countries and regions overseas including Singapore, Thailand, Iran, Turkey, Poland, Italy, England, France, Russia, Germany, the United States, Australia, Argentina, Brazil as well as other countries and regions all over the world.

We are a trusted and reliable bearing supplier, choose us to be your good partner!

Quality Inspection
 

 

Our Advantages: 

1.  Professional production team with advanced production equipment and testing instruments. 
2.  Many years of export experience can provide customers with better service and problem-solving capabilities.
3.  Customers all over the world enable us to better understand the market and provide customers with suitable bearings.
4.  Sincerity, cooperation, mutual and provide good quality bearings for clients are the development idea of our company
5.  Quick delivery, shipping goods on time. Save more time and cost for all customers. 

 

More choices

FAQ

1. Q: Are you trading company or manufacturer ?
   A: We have our own factory , our type is factory + trade.

2. Q: Could you accept OEM and customize?
    A: Yes, we can customize products according to your sample or drawing.

3. Q: How long is your delivery time? 
    A: If stock, within 7 days to ship or based on your order quantity.

4. Q: Could you supply sample for free? 
    A: Yes, we can offer the sample for free,do you mind to buy a “ticket” for her?

More details, please contact with us. Thanks for your time !!!

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Cage: With Cage
Rows Number: Single
Load Direction: Radial Bearing
Style: Without Outer Ring, With Outer Ring, Without Inner Ring, With Inner Ring
Material: Bearing Steel
Type: Open
Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

track bearing

Can you provide examples of industries and applications where track bearings are frequently used?

Track bearings find extensive use in various industries and applications where smooth and controlled motion along tracks or guide rails is required. Let’s explore some examples of industries and applications where track bearings are frequently used:

  • Material Handling and Conveying: Track bearings are widely employed in material handling and conveying systems, such as conveyor belts, roller conveyors, and overhead cranes. They facilitate the smooth movement of goods, packages, and components along the tracks, ensuring efficient and reliable transportation within warehouses, distribution centers, manufacturing facilities, and airports.
  • Automotive and Transportation: Track bearings are utilized in various automotive applications, including suspension systems, steering systems, and sliding doors. They enable smooth and precise movement of components, contributing to vehicle performance, comfort, and safety. Additionally, track bearings are used in railway applications, such as railcar doors, sliding mechanisms, and track guidance systems.
  • Aerospace and Defense: Track bearings play a crucial role in aerospace and defense applications, including aircraft landing gears, flap systems, and missile launchers. They provide the necessary support, guidance, and load-carrying capacity for critical components, ensuring smooth and controlled motion in demanding operating conditions.
  • Industrial Machinery: Track bearings are commonly found in various industrial machinery and equipment. They are used in machine tools, robotics, printing presses, industrial ovens, and packaging machines, among others. In these applications, track bearings contribute to precise motion control, accurate positioning, and reliable performance of moving components.
  • Construction and Mining: Track bearings are extensively employed in construction and mining equipment, such as excavators, bulldozers, cranes, and drilling machines. They provide support and guidance for the movable parts, allowing efficient and controlled movement in rugged and demanding environments.
  • Medical and Healthcare: Track bearings are utilized in various medical and healthcare applications. They are used in hospital beds, medical imaging equipment, laboratory automation systems, and patient handling devices. Track bearings enable smooth and quiet operation, precise positioning, and patient comfort in these critical healthcare settings.
  • Renewable Energy: Track bearings are employed in renewable energy systems, including solar tracking systems and wind turbine pitch and yaw mechanisms. They enable the precise tracking of solar panels and the controlled adjustment of wind turbine blades, maximizing energy capture and optimizing system performance.

These examples represent just a fraction of the many industries and applications where track bearings are frequently used. The versatility, reliability, and precise motion control provided by track bearings make them a fundamental component in numerous mechanical systems across various sectors.

track bearing

Can track bearings withstand harsh environments or exposure to contaminants?

Track bearings are designed to operate in a wide range of environments, including harsh conditions and exposure to contaminants. However, the ability of track bearings to withstand such environments depends on their specific design, materials, and protective measures. Here’s a detailed explanation:

Many track bearings are engineered with features that enhance their resistance to harsh environments and contaminants. These features may include:

  • Sealing and Shielding: Some track bearings are equipped with seals or shields that provide a physical barrier against contaminants such as dirt, dust, water, and debris. These seals or shields help prevent the entry of contaminants into the bearing’s internal components, reducing the risk of damage and premature wear.
  • Corrosion Resistance: Track bearings intended for use in corrosive environments are often constructed from materials that offer high corrosion resistance. Stainless steel, for example, is commonly used due to its ability to withstand exposure to moisture, chemicals, and other corrosive substances.
  • Specialized Coatings: Some track bearings may feature specialized coatings or surface treatments that provide additional protection against contaminants and harsh conditions. These coatings can enhance the bearing’s resistance to corrosion, abrasion, and chemical exposure.
  • High-Temperature Capability: Certain track bearings are designed to withstand high-temperature environments. They are typically constructed using heat-resistant materials and lubricants that can maintain their structural integrity and performance even under extreme heat.
  • Environmental Sealing: In applications where track bearings are exposed to extreme conditions, such as underwater or in highly dusty environments, special environmental sealing measures may be employed. These measures can include the use of advanced sealing technologies or the encapsulation of the bearings within protective housings.

While track bearings are designed to withstand harsh environments and exposure to contaminants, it is important to note that their performance and longevity can still be affected over time. Regular maintenance, including cleaning, inspection, and lubrication, is crucial to ensure proper functioning and to mitigate the impact of contaminants on the bearings.

It is recommended to consult the manufacturer’s specifications and guidelines for the track bearings being used in a specific application. Manufacturers often provide information on the environmental ratings and limits of their bearings, helping users determine the suitability of the bearings for particular harsh environments or exposure to contaminants.

By selecting track bearings with appropriate features, materials, and protection, and by implementing proper maintenance practices, it is possible to enhance the bearings’ ability to withstand harsh environments and exposure to contaminants, thereby maximizing their performance and longevity.

track bearing

How do track bearings contribute to smooth and precise motion in machinery and equipment?

Track bearings play a crucial role in enabling smooth and precise motion in machinery and equipment. They provide support and guidance for moving components, allowing them to move along tracks or guide rails with minimal friction and accurate positioning. Let’s explore how track bearings contribute to smooth and precise motion:

  • Reduced Friction: Track bearings are designed to minimize friction between the rolling elements (such as balls or rollers) and the raceways (inner and outer rings). By reducing friction, track bearings help to minimize energy losses, prevent excessive heat generation, and extend the lifespan of the bearing and other components in the system. Low friction enables smoother and more efficient motion, resulting in improved overall performance.
  • Accuracy and Precision: Track bearings are manufactured to precise tolerances, ensuring consistent dimensions and smooth surfaces. This precision contributes to accurate and repeatable positioning of the moving components along the track or guide rail. It allows machinery and equipment to achieve the desired motion with minimal deviation or backlash, enabling precise control and operation.
  • Load Distribution: Track bearings are designed to distribute loads evenly across the rolling elements and raceways. This load distribution helps prevent localized stress concentrations and ensures that the applied loads are shared by multiple contact points. By distributing the loads effectively, track bearings enhance the stability and integrity of the moving components, reducing the risk of premature wear or failure.
  • Guidance and Alignment: Track bearings provide guidance and alignment for the moving components. They help maintain the desired orientation and position of the components along the track or guide rail, preventing misalignment and unwanted movements. This guidance ensures smooth and precise motion, minimizing vibrations, noise, and the risk of component damage or malfunction.
  • Shock and Impact Absorption: Track bearings are designed to absorb shocks and impacts that may occur during operation. They help cushion the effects of sudden loads or vibrations, protecting the moving components and reducing the transmission of these forces to the rest of the machinery or equipment. This shock absorption capability contributes to smoother and more stable motion, enhancing overall performance and reliability.

By incorporating high-quality track bearings into machinery and equipment, engineers can achieve smooth and precise motion, improving the efficiency, accuracy, and longevity of the system. Proper selection, installation, and maintenance of track bearings are essential to ensure optimal performance and to minimize the risk of issues such as excessive wear, misalignment, or loss of motion control.

China Custom Needle Roller Bearing Supplier Nutr20A Nutr20X Track Roller Bearing for Machinery Using   bearing driverChina Custom Needle Roller Bearing Supplier Nutr20A Nutr20X Track Roller Bearing for Machinery Using   bearing driver
editor by CX 2024-05-14

China manufacturer PMI MSA30S Linear Guide Rail Heavy Duty Track Rollers Bearings and Carriage deep groove ball bearing

Product Description

Product Description

PMI MSA30S Linear Xihu (West Lake) Dis. Rail Heavy Duty Track Rollers Bearings and Carriage
Features
The trains of balls are designed to a contact angle of 45° which enables it to bear an equal load in radial, reversed radial and lateral directions. Therefore, it can be applied in any installation direction. Furthermore, MSA series can achieve a well balanced preload for increasing rigidity in 4 directions while keeping a low frictional resistance. This is especially suit to high precision and high rigidity required motion.
The patent design of lubrication route makes the lubricant evenly distribute in each circulation loop. Therefore, the optimum lubrication can be achieved in any installation direction, and this promotes the performance in running accuracy, service life, and reliability.

Characteristics
• High Rigidity, Four-way Equal Load
• Self Alignment Capability
• Smooth Movement with Low Noise
• Interchangeability

Mode

PMI 

Material

Carbon Steel

   Related models     MSA15/20/25/30/35/45/55/65 S — LS

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Warehouse Crane, Shipboard Crane, Goods Yard Crane, Building Crane, Workshop Crane, CNC Machine
Material: Steel
Structure: CNC Machine
Installation: Automation Equipment
Driven Type:
Carrying Capacity: Weight Level
Samples:
US$ 29/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

track bearing

Can track bearings be customized or modified for specific track or linear motion applications?

Yes, track bearings can be customized or modified to meet specific requirements of track or linear motion applications. Manufacturers often offer a range of options and capabilities to tailor track bearings to the unique needs of different industries and applications. Here are some ways in which track bearings can be customized or modified:

  • Size and Dimensional Variations: Track bearings can be customized in terms of size, diameter, width, and overall dimensions to fit specific track or linear motion systems. Manufacturers can provide bearings with varying sizes and load capacities to accommodate different application requirements.
  • Material Selection: Track bearings can be manufactured from various materials depending on the specific application’s demands. Common materials include steel, stainless steel, ceramic, and polymer composites. Material selection can be customized to achieve desired properties such as corrosion resistance, high temperature tolerance, or low friction.
  • Sealing and Protection: In applications where track bearings are exposed to contaminants, moisture, or harsh environments, customized sealing and protection features can be added. These may include additional seals, shields, or coatings to enhance the bearing’s resistance to dust, water, chemicals, or extreme temperatures.
  • Lubrication Options: While self-lubricating or maintenance-free track bearings offer convenience, applications with specific lubrication requirements may benefit from customized lubrication options. Manufacturers can modify the bearing design to accommodate external lubrication systems or provide alternative lubrication methods to meet the unique demands of the application.
  • Specialized Load and Speed Ratings: In certain applications, track bearings may need to handle exceptionally high loads or operate at high speeds. Manufacturers can customize the bearing design to offer specialized load and speed ratings to ensure optimal performance and reliability in such demanding conditions.
  • Mounting and Attachment Options: Track bearings can be customized with different mounting and attachment options to facilitate easy installation and integration into specific track or linear motion systems. This may include variations in bolt hole patterns, flange designs, or specialized mounting arrangements.
  • Track Geometry Compatibility: Track bearings can be designed or modified to match specific track or guide rail geometries. This ensures proper fit, alignment, and smooth operation along the designated track, minimizing the risk of misalignment or issues related to track compatibility.

It is important to work closely with bearing manufacturers or suppliers to discuss the specific requirements of the track or linear motion application. By collaborating with experts, it is possible to customize or modify track bearings to optimize performance, reliability, and longevity in a wide range of applications.

track bearing

Can track bearings withstand harsh environments or exposure to contaminants?

Track bearings are designed to operate in a wide range of environments, including harsh conditions and exposure to contaminants. However, the ability of track bearings to withstand such environments depends on their specific design, materials, and protective measures. Here’s a detailed explanation:

Many track bearings are engineered with features that enhance their resistance to harsh environments and contaminants. These features may include:

  • Sealing and Shielding: Some track bearings are equipped with seals or shields that provide a physical barrier against contaminants such as dirt, dust, water, and debris. These seals or shields help prevent the entry of contaminants into the bearing’s internal components, reducing the risk of damage and premature wear.
  • Corrosion Resistance: Track bearings intended for use in corrosive environments are often constructed from materials that offer high corrosion resistance. Stainless steel, for example, is commonly used due to its ability to withstand exposure to moisture, chemicals, and other corrosive substances.
  • Specialized Coatings: Some track bearings may feature specialized coatings or surface treatments that provide additional protection against contaminants and harsh conditions. These coatings can enhance the bearing’s resistance to corrosion, abrasion, and chemical exposure.
  • High-Temperature Capability: Certain track bearings are designed to withstand high-temperature environments. They are typically constructed using heat-resistant materials and lubricants that can maintain their structural integrity and performance even under extreme heat.
  • Environmental Sealing: In applications where track bearings are exposed to extreme conditions, such as underwater or in highly dusty environments, special environmental sealing measures may be employed. These measures can include the use of advanced sealing technologies or the encapsulation of the bearings within protective housings.

While track bearings are designed to withstand harsh environments and exposure to contaminants, it is important to note that their performance and longevity can still be affected over time. Regular maintenance, including cleaning, inspection, and lubrication, is crucial to ensure proper functioning and to mitigate the impact of contaminants on the bearings.

It is recommended to consult the manufacturer’s specifications and guidelines for the track bearings being used in a specific application. Manufacturers often provide information on the environmental ratings and limits of their bearings, helping users determine the suitability of the bearings for particular harsh environments or exposure to contaminants.

By selecting track bearings with appropriate features, materials, and protection, and by implementing proper maintenance practices, it is possible to enhance the bearings’ ability to withstand harsh environments and exposure to contaminants, thereby maximizing their performance and longevity.

track bearing

How do track bearings compare to other types of bearings like ball bearings or roller bearings?

Track bearings, ball bearings, and roller bearings are all types of rolling bearings used in various applications. Let’s compare track bearings to ball bearings and roller bearings to understand their similarities and differences:

  • Design and Construction: Track bearings, ball bearings, and roller bearings have different designs and constructions. Track bearings, also known as track rollers or track follower bearings, are designed specifically for guided linear or rotational motion along a track or guide rail. They feature an outer ring with a track surface, an inner ring, rolling elements (such as rollers or needles), and a cage. Ball bearings, on the other hand, have spherical rolling elements (balls) sandwiched between inner and outer rings. Roller bearings, as the name suggests, have cylindrical or tapered rolling elements (rollers) between inner and outer rings.
  • Motion and Load Handling: Track bearings are primarily used for guided motion in track-based systems, while ball bearings and roller bearings are used for general rotational or linear motion. Track bearings are designed to support both radial and axial loads and provide smooth and controlled motion along the track. Ball bearings and roller bearings are also capable of supporting radial and axial loads but are typically used in applications where the motion is not constrained to a specific track or guide rail. Roller bearings, with their larger contact area and higher load-carrying capacity, are often preferred for applications with higher loads.
  • Applications: Track bearings are commonly used in applications such as material handling systems, conveyors, cam mechanisms, automated machinery, construction equipment, and agricultural machinery, where guided motion along a track or rail is required. Ball bearings and roller bearings find applications in a wide range of industries and systems, including electric motors, pumps, automotive applications, industrial machinery, and appliances.
  • Friction and Efficiency: Track bearings, ball bearings, and roller bearings all aim to minimize friction and ensure efficient operation. However, due to their different designs and contact surfaces, they exhibit varying levels of friction. Ball bearings typically have lower friction due to point contact between the balls and the raceways. Roller bearings, especially tapered roller bearings, distribute the load over a larger contact area, resulting in slightly higher friction compared to ball bearings. Track bearings, with their track interface, may have slightly higher friction compared to ball bearings or roller bearings due to the rolling elements’ contact with the track surface.
  • Installation and Maintenance: Track bearings, ball bearings, and roller bearings require proper installation and maintenance for optimal performance and longevity. However, track bearings may require additional attention during installation as they need to be properly aligned with the track or guide rail. Regular lubrication and periodic inspection are essential for all types of bearings to ensure smooth operation and prevent premature failure.

In summary, track bearings, ball bearings, and roller bearings have distinct designs and applications. Track bearings are specialized for guided motion along a track or rail, while ball bearings and roller bearings are more versatile and used in a wide range of rotational or linear motion applications. Each type of bearing has its advantages and considerations in terms of load handling, friction, efficiency, and installation requirements. Selecting the appropriate bearing type depends on the specific application requirements, load conditions, motion characteristics, and environmental factors.

China manufacturer PMI MSA30S Linear Guide Rail Heavy Duty Track Rollers Bearings and Carriage   deep groove ball bearingChina manufacturer PMI MSA30S Linear Guide Rail Heavy Duty Track Rollers Bearings and Carriage   deep groove ball bearing
editor by CX 2024-05-14