Product Description
Agricultural Motorcycle Auto Track Trailer Front Wheel Hub Car Motorcycle Spare Parts 6310 Deep Groove Ball Bearing with high precision
Bearing parameters:
CHROME STEEL* | Dimensions in mm unless otherwise specified |
||||||
Bore | O.D. | Width | Open Bearing | Shielded Bearing | Sealed Bearing | Basic Load Ratings | |
KN | |||||||
HNS | HNS | HNS | dynamic | static | |||
Reference | Reference | Reference | C | Co | |||
20 | 42 | 12 | 6004 | 6004ZZ | 6004-2RS | 7.22 | 4.46 |
47 | 14 | 6204 | 6204ZZ | 6204-2RS | 12.7 | 6.5 | |
52 | 15 | 6304 | 6304ZZ | 6304-2RS | 15.9 | 7.8 | |
25 | 47 | 12 | 6005 | 6005ZZ | 6005-2RS | 10.1 | 5.85 |
52 | 15 | 6205 | 6205ZZ | 6205-2RS | 14 | 7.8 | |
62 | 17 | 6305 | 6305ZZ | 6305-2RS | 22.5 | 11.6 | |
80 | 21 | 6405 | 6405ZZ | 6405-2RS | 36.1 | 19.4 | |
30 | 55 | 13 | 6006 | 6006ZZ | 6006-2RS | 10.2 | 6.91 |
62 | 16 | 6206 | 6206ZZ | 6206-2RS | 19.5 | 11.2 | |
72 | 19 | 6306 | 6306ZZ | 6306-2RS | 28.1 | 16 | |
90 | 23 | 6406 | 6406ZZ | 6406-2RS | 43.4 | 23.9 | |
35 | 62 | 14 | 6007 | 6007ZZ | 6007-2RS | 16 | 10.3 |
72 | 17 | 6207 | 6207ZZ | 6207-2RS | 25.5 | 15.3 | |
80 | 21 | 6307 | 6307ZZ | 6307-2RS | 33.2 | 19 | |
100 | 25 | 6407 | 6407ZZ | 6407-2RS | 55 | 31 | |
40 | 68 | 15 | 6008 | 6008ZZ | 6008-2RS | 13 | 11.5 |
80 | 18 | 6208 | 6208ZZ | 6208-2RS | 29.8 | 18 | |
90 | 23 | 6308 | 6308ZZ | 6308-2RS | 39.8 | 23.3 | |
110 | 27 | 6408 | 6408ZZ | 6408-2RS | 65.5 | 37.5 | |
45 | 75 | 16 | 6009 | 6009ZZ | 6009-2RS | 21 | 14.9 |
85 | 19 | 6209 | 6209ZZ | 6209-2RS | 32.2 | 21 | |
100 | 25 | 6309 | 6309ZZ | 6309-2RS | 51.1 | 30.5 | |
120 | 29 | 6409 | 6409ZZ | 6409-2RS | 77.5 | 45.5 | |
50 | 80 | 16 | 6571 | 6571ZZ | 6571-2RS | 22 | 16.2 |
90 | 20 | 6210 | 6210ZZ | 6210-2RS | 34 | 22.5 | |
110 | 27 | 6310 | 6310ZZ | 6310-2RS | 59.9 | 36.9 | |
130 | 31 | 6410 | 6410ZZ | 6410-2RS | 92.2 | 55.2 | |
55 | 90 | 18 | 6011 | 6011ZZ | 6011-2RS | 30.4 | 22 |
100 | 21 | 6211 | 6211ZZ | 6211-2RS | 43.3 | 28.1 | |
120 | 29 | 6311 | 6311ZZ | 6311-2RS | 71.5 | 44.6 | |
140 | 33 | 6411 | 6411ZZ | 6411-2RS | 100 | 62.5 | |
60 | 95 | 18 | 6012 | 6012ZZ | 6012-2RS | 30.7 | 22.7 |
110 | 22 | 6212 | 6212ZZ | 6212-2RS | 46.1 | 31.5 | |
130 | 31 | 6312 | 6312ZZ | 6312-2RS | 79.4 | 50.4 | |
150 | 35 | 6412 | 6412ZZ | 6412-2RS | 109 | 70 | |
65 | 100 | 18 | 6013 | 6013ZZ | 6013-2RS | 32.1 | 24.9 |
120 | 23 | 6213 | 6213ZZ | 6213-2RS | 54.2 | 39.3 | |
140 | 33 | 6313 | 6313ZZ | 6313-2RS | 89.5 | 59.7 | |
160 | 37 | 6413 | 6413ZZ | 6413-2RS | 118 | 78.5 | |
70 | 110 | 20 | 6014 | 6014ZZ | 6014-2RS | 38.6 | 30.6 |
125 | 24 | 6214 | 6214ZZ | 6214-2RS | 58.9 | 43.6 | |
150 | 35 | 6314 | 6314ZZ | 6314-2RS | 101 | 66 | |
180 | 42 | 6414 | 6414ZZ | 6414-2RS | 140 | 99.5 | |
75 | 115 | 20 | 6015 | 6015ZZ | 6015-2RS | 31 | 33.1 |
130 | 25 | 6215 | 6215ZZ | 6215-2RS | 64.3 | 47.5 | |
160 | 37 | 6315 | 6315ZZ | 6315-2RS | 111 | 74.2 | |
190 | 45 | 6415 | 6415ZZ | 6415-2RS | 154 | 115 | |
80 | 125 | 22 | 6016 | 6016ZZ | 6016-2RS | 47.5 | 39.8 |
140 | 26 | 6216 | 6216ZZ | 6216-2RS | 68.1 | 53.3 | |
170 | 39 | 6316 | 6316ZZ | 6316-2RS | 120 | 83.9 | |
200 | 48 | 6416 | 6416ZZ | 6416-2RS | 163 | 125 | |
85 | 130 | 22 | 6017 | 6017ZZ | 6017-2RS | 50.8 | 42.8 |
150 | 28 | 6217 | 6217ZZ | 6217-2RS | 83.2 | 64 | |
180 | 41 | 6317 | 6317ZZ | 6317-2RS | 132 | 96.5 | |
210 | 52 | 6417 | 6417ZZ | 6417-2RS | 175 | 138 | |
90 | 140 | 24 | 6018 | 6018ZZ | 6018-2RS | 58 | 49.8 |
160 | 30 | 6218 | 6218ZZ | 6218-2RS | 92.7 | 71.3 | |
190 | 43 | 6318 | 6318ZZ | 6318-2RS | 145 | 108 | |
225 | 54 | 6418 | 6418ZZ | 6418-2RS | 192 | 158 | |
95 | 145 | 24 | 6019 | 6019ZZ | 6019-2RS | 57.8 | 50 |
170 | 32 | 6219 | 6219ZZ | 6219-2RS | 105 | 79.1 | |
200 | 45 | 6319 | 6319ZZ | 6319-2RS | 157 | 122 | |
100 | 150 | 24 | 6571 | 6571ZZ | 6571-2RS | 64.5 | 56.2 |
180 | 34 | 6220 | 6220ZZ | 6220-2RS | 118 | 88.4 | |
215 | 47 | 6320 | 6320ZZ | 6320-2RS | 173 | 140 | |
105 | 160 | 26 | 6571 | 6571ZZ | 6571-2RS | 71.8 | 63.2 |
190 | 36 | 6221 | 6221ZZ | 6221-2RS | 126 | 98.8 | |
225 | 49 | 6321 | 6321ZZ | 6321-2RS | 173 | 145 | |
110 | 170 | 28 | 6571 | 6571ZZ | 6571-2RS | 81.9 | 72.9 |
200 | 38 | 6222 | 6222ZZ | 6222-2RS | 136 | 112 | |
240 | 50 | 6322 | 6322ZZ | 6322-2RS | 193 | 171 | |
120 | 180 | 28 | 6571 | 6571ZZ | 6571-2RS | 88.7 | 79.7 |
215 | 40 | 6224 | 6224ZZ | 6224-2RS | 139 | 112 | |
260 | 55 | 6324 | 6324ZZ | 6324-2RS | 217 | 196 | |
130 | 200 | 33 | 6026 | 6026ZZ | 6026-2RS | 105 | 96.8 |
230 | 40 | 6226 | 6226ZZ | 6226-2RS | 148 | 125 | |
280 | 58 | 6326 | 6326ZZ | 6326-2RS | 218 | 205 | |
140 | 210 | 33 | 6571 | 6571ZZ | 6571-2RS | 116 | 108 |
250 | 42 | 6228 | 6228ZZ | 6228-2RS | 179 | 167 | |
300 | 62 | 6328 | 6328ZZ | 6328-2RS | 275 | 272 | |
150 | 225 | 35 | 6030 | 6030ZZ | 6030-2RS | 132 | 125 |
270 | 45 | 6230 | 6230ZZ | 6230-2RS | 190 | 183 | |
160 | 240 | 38 | 6032 | 6032ZZ | 6032-2RS | 145 | 138 |
290 | 48 | 6232 | 6232ZZ | 6232-2RS | 215 | 218 |
About Deep Groove Ball Cearing
- 6000 Series – Extra Light Ball Bearings – Ideal for limited space applications
- 6200 Series – Light Series Ball Bearings – Balanced between space and load capacity
- 6300 Series – Medium Series Ball Bearings – Ideal for heavier load capacity applications
Deep groove ball bearing component:
Rich bearings in stock:
OEM is available:
Application
Package:
A. Plastic paper + kraft paper + outer carton + Nylon bag
B. Tube package + outer carton + Nylon bag
C. Single box + outer carton + pallets
D. According to your requirement
For more information, contact us directly pls.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Aligning: | Non-Aligning Bearing |
---|---|
Separated: | Unseparated |
Rows Number: | Single |
Load Direction: | Radial Bearing |
Material: | Bearing Steel |
Contact Angle: | 0 |
Samples: |
US$ 0.01/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Can you explain the maintenance and lubrication requirements for track bearings?
Maintenance and lubrication are essential aspects of ensuring the optimal performance and longevity of track bearings. Proper maintenance practices and appropriate lubrication help minimize wear, reduce friction, prevent corrosion, and extend the service life of the bearings. Here’s an explanation of the maintenance and lubrication requirements for track bearings:
Maintenance Requirements:
- Cleanliness: It is crucial to maintain a clean operating environment for track bearings. Regularly remove dirt, dust, and debris from the track and bearing surfaces to prevent contamination, which can lead to premature wear and damage.
- Inspection: Periodically inspect the track bearings for signs of wear, damage, or misalignment. Check for excessive play, noise, or roughness during operation. If any issues are detected, take appropriate measures such as bearing replacement or realignment to ensure optimal performance.
- Tightening and Fasteners: Check the tightness of fasteners, such as bolts or screws, that secure the track bearings. Loose fasteners can lead to misalignment or instability. Ensure that all fasteners are properly tightened according to the manufacturer’s specifications.
- Track Alignment: Proper track alignment is crucial for smooth and efficient operation of track bearings. Regularly check the alignment of the track or guide rails and make necessary adjustments to maintain proper alignment, minimizing excessive loads and wear on the bearings.
- Load Limits: Adhere to the specified load limits for the track bearings. Exceeding the recommended load capacity can cause premature wear and failure. Consider the dynamic and static load ratings of the bearings to ensure they are not subjected to excessive loads that can compromise their performance.
Lubrication Requirements:
- Proper Lubricant Selection: Select the appropriate lubricant based on the operating conditions, such as temperature, load, and speed. Consult the manufacturer’s recommendations or seek expert advice to ensure the lubricant’s compatibility with the track bearings and the specific application.
- Regular Lubrication: Follow a regular lubrication schedule as recommended by the manufacturer. This may involve applying lubricant at specified intervals or based on the operating hours. Adequate lubrication helps minimize friction, reduce wear, and maintain proper functioning of the track bearings.
- Correct Lubrication Method: Apply the lubricant using the appropriate method, whether it’s manual greasing, automatic lubrication systems, or specialized lubrication techniques. Ensure that the lubricant reaches all necessary contact points and provides sufficient coverage to the bearing surfaces.
- Monitoring and Replenishment: Monitor the lubricant levels regularly and replenish as needed. In some cases, track bearings may have built-in lubrication systems that require periodic refilling or maintenance. Keep track of the lubricant condition and replace it when it becomes contaminated or degraded.
- Environmental Considerations: Consider the operating environment when selecting the lubricant. Extreme temperatures, exposure to moisture, or the presence of chemicals or contaminants may require special lubricants that can withstand these conditions and provide effective protection and lubrication.
It is important to consult the manufacturer’s guidelines and recommendations specific to the track bearings being used. Following the recommended maintenance and lubrication practices ensures optimal performance, reduces the risk of premature failure, and maximizes the overall lifespan of the track bearings.
How do track bearings enhance the overall efficiency and functionality of linear motion systems?
Track bearings play a crucial role in enhancing the overall efficiency and functionality of linear motion systems. They offer several benefits that contribute to improved performance, increased reliability, and enhanced functionality. Here’s a detailed explanation:
- Reduced Friction: Track bearings are designed to minimize friction between moving components, allowing for smoother and more efficient linear motion. By reducing friction, they help to optimize the efficiency of the system, reducing energy consumption and minimizing wear on the components.
- Precision and Stability: Track bearings provide precise guidance and stability to the linear motion system. They ensure accurate and repeatable motion along the intended path, allowing for precise positioning and control. This is particularly important in applications that require high accuracy, such as CNC machines, robotics, and automated assembly lines.
- Load Distribution: Track bearings distribute the load evenly along their length, allowing for efficient load transfer and reducing the concentration of forces on specific components. This helps to prevent excessive wear, deformation, and premature failure of the system, improving overall reliability and longevity.
- Handling Heavy Loads: Track bearings are specifically designed to handle heavy loads in linear motion systems. They offer high load capacities and robust construction, enabling them to support and move heavy objects with ease. This capability is essential in industries such as material handling, construction, and transportation.
- Smooth and Quiet Operation: Track bearings are engineered to provide smooth and quiet operation, minimizing noise and vibrations in the linear motion system. This is especially important in applications where noise reduction and comfort are critical, such as in medical equipment, office automation, and consumer electronics.
- Versatility and Adaptability: Track bearings come in various designs, sizes, and configurations to accommodate different linear motion system requirements. They can be easily integrated into existing systems or customized to fit specific applications. This versatility allows for greater flexibility and adaptability in designing and implementing linear motion solutions.
- Maintenance and Serviceability: Track bearings are designed for ease of maintenance and serviceability. They often feature removable components, such as seals or shields, that allow for inspection, cleaning, and lubrication. This simplifies maintenance tasks and reduces downtime, contributing to improved overall system efficiency and uptime.
By incorporating track bearings into linear motion systems, industries can benefit from increased efficiency, improved performance, and enhanced functionality. Whether it’s achieving precise positioning, handling heavy loads, reducing friction, or ensuring smooth operation, track bearings play a vital role in optimizing the overall efficiency and functionality of linear motion systems.
Can you explain the different types of track bearings used in industrial and mechanical systems?
Track bearings, also known as track rollers or track follower bearings, come in various types to suit different industrial and mechanical system requirements. Let’s explore the different types of track bearings commonly used in these applications:
- Yoke Type Track Rollers: Yoke type track rollers are a popular type of track bearing characterized by their thick outer rings. They are designed to handle high radial loads and moderate axial loads. Yoke type track rollers feature an inner ring with a stud for mounting on a shaft or stud. They are widely used in applications such as conveyors, cam mechanisms, material handling systems, and agricultural machinery.
- Stud Type Track Rollers: Stud type track rollers are similar to yoke type track rollers but lack an inner ring. Instead, they have a stud that serves as the mounting component. Stud type track rollers are suitable for applications with limited space or where the outer ring can be directly mounted onto a mating surface. They are commonly used in applications such as cam mechanisms, indexing equipment, and tensioning systems.
- Cam Followers: Cam followers, also known as cam bearings or track followers, are track bearings designed specifically for cam-driven systems. They have a stud or shaft for mounting and a built-in roller or needle bearing. Cam followers follow the profile of a cam, converting the rotary motion of the cam into linear or oscillating motion. They are used in applications such as printing presses, packaging machinery, textile machinery, and automotive engines.
- Guiding Track Rollers: Guiding track rollers are track bearings designed to provide precise and guided linear motion. They feature a thick outer ring with a track or guide surface. Guiding track rollers are commonly used in material handling systems, conveyor systems, and automated machinery to facilitate smooth and controlled movement along a track or guide rail.
- V-Groove Track Rollers: V-groove track rollers have a specialized V-shaped groove on the outer ring. This groove allows the rollers to run on V-shaped tracks or rails, providing accurate alignment and guidance. V-groove track rollers are used in applications such as track systems, sliding gates, and linear motion guides.
- Flanged Track Rollers: Flanged track rollers feature an additional flange on the outer ring. The flange helps in axial guidance and prevents the track roller from shifting or tilting under axial loads. Flanged track rollers are commonly used in applications such as cam mechanisms, linear motion systems, and conveyor systems.
- Idler Track Rollers: Idler track rollers are non-powered track rollers used to support and guide conveyor belts, chains, or other moving components. They are typically used in material handling systems, conveyor systems, and packaging machinery.
These different types of track bearings offer versatility and flexibility in industrial and mechanical systems. Depending on the specific application requirements, engineers and designers can select the most suitable type of track bearing to ensure smooth motion, reliable operation, and efficient load support. The choice of track bearing type depends on factors such as load capacity, space constraints, track configuration, and environmental conditions.
editor by CX 2024-05-17
China Hot selling Agricultural Motorcycle Auto Track Trailer Front Wheel Hub Unit Car Motorcycle Spare Parts 6301 6004 6203 6205 6310 Deep Groove Ball Bearing with high quality
Product Description
Product Description
Company Profile
ZheJiang CZPT Bearing Co., Ltd. is affiliated to ZheJiang Kaidi Bearing Group – a specialized manufacturer of kinds of bearings for about 20 years.
Our company is specialized in producing Deep Groove Ball Bearings, Tapered Roller Bearings, Spherical Roller Bearings and Special Bearings in accordance with Customers’ designs.Our bearings has been widely applied into agricultural equipments, home appliances, power equipments, machine tools, automotives and engineering machinery, etc.
Our Products
ZheJiang CZPT Bearing Co., Ltd. is a specialized manufacturer of ball bearings for about 20 years. Our main products include:
1, Miniature Bearings: like 608, 609, 625, 626, 693, 695, etc;
2, Deep Groove Ball Bearings: like 6000, 6200, 6300, 6800, 6900, 16000 Series;
3,Non-Standard Bearings: U grooved bearings, V grooved bearings, double grooved bearings, bearing rollers with or without plastic injection. 4,Pillow Block Bearing: UCP/ UCF/ UCFL;
5,Tapered Roller Bearings
6,Linear Motion Bearings
Processing Process
we have manufacture bearing more than 20 years, and can produce different style of bearings. Our factory starts production from raw materials. We have a 20-person R&D team and launch a new product every 5 days. We have more than 600 people to produce bearing team, we produce products, the price is the most competitive in China.
Packaging & Shipping
Our Activities
FAQ
1.Q:Do you know the Detail Size for the Bearing ? 2.Q: This Size of Bearing is common parts? 3.Q:Are you a factory or a Trade Company for Bearing ? 4.Q:How many the MOQ of the Bearing? 5.Q:Could you supply free sample of bearing for our test? 6.Q:Could you accept OEM and customize? 7.Q:Do you have stocks? |
Contact Us
Jane
ZheJiang CZPT Bearing Co., Ltd.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Contact Angle: | 15° |
---|---|
Aligning: | Non-Aligning Bearing |
Separated: | Unseparated |
Rows Number: | Single |
Load Direction: | Thrust Bearing |
Material: | Bearing Steel |
Samples: |
US$ 0.05/Set
1 Set(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
How does proper installation and alignment impact the performance and longevity of track bearings?
Proper installation and alignment play a critical role in the performance and longevity of track bearings. Correct installation ensures that the bearings are positioned and secured accurately, while proper alignment ensures that the load is distributed evenly and the bearings operate smoothly. Here’s an explanation of how proper installation and alignment impact the performance and longevity of track bearings:
Installation Impact:
- Load Distribution: Proper installation ensures that the track bearings are aligned and positioned correctly, allowing for even load distribution. When bearings are installed incorrectly, the load may be unevenly distributed, leading to excessive wear on certain parts of the bearings and reduced overall performance.
- Stability and Rigidity: Accurate installation provides stability and rigidity to the track bearings. Properly secured bearings minimize the risk of movement or vibration during operation, which can cause additional stress, premature wear, and potential damage to the bearings and surrounding components.
- Reduction of Misalignment: Correct installation minimizes the chances of misalignment between the track bearings and the track or guide rails. Misalignment can lead to uneven loading, increased friction, and accelerated wear and tear on the bearings. Proper alignment reduces these issues, ensuring smooth and efficient operation.
- Prevention of Contamination: During installation, it is important to take precautions to prevent contamination of the track bearings. Proper handling techniques, cleanliness, and the use of appropriate tools or protective measures help avoid introducing dirt, dust, or debris that can compromise the bearing’s performance and longevity.
Alignment Impact:
- Reduced Friction and Wear: Proper alignment of track bearings helps minimize friction and wear. When bearings are misaligned, excessive forces and irregular motion can occur, leading to increased friction and accelerated wear. Proper alignment ensures that the bearings operate within their intended design parameters, reducing friction and promoting longevity.
- Optimal Load Distribution: Correct alignment ensures that the load is distributed evenly across the track bearings. This prevents excessive stress on specific areas of the bearings, reducing the risk of premature failure and extending their service life. Optimal load distribution also contributes to smoother operation and improved overall performance.
- Minimized Noise and Vibration: Proper alignment helps minimize noise and vibration during operation. Misaligned track bearings can result in irregular motion, leading to unwanted noise and vibration that can affect the performance, comfort, and efficiency of the machinery or equipment. Proper alignment promotes smoother and quieter operation.
- Improved Efficiency: When track bearings are correctly aligned, the machinery or equipment experiences reduced resistance and improved efficiency. Misalignment can result in energy losses, increased power consumption, and decreased overall efficiency. Proper alignment ensures optimal power transfer and minimizes energy wastage.
It is important to follow the manufacturer’s guidelines and recommendations for the specific track bearings being installed. Proper installation techniques, including accurate positioning, secure fastening, and appropriate alignment, contribute to the optimal performance, reliability, and longevity of track bearings in various applications.
Can track bearings withstand harsh environments or exposure to contaminants?
Track bearings are designed to operate in a wide range of environments, including harsh conditions and exposure to contaminants. However, the ability of track bearings to withstand such environments depends on their specific design, materials, and protective measures. Here’s a detailed explanation:
Many track bearings are engineered with features that enhance their resistance to harsh environments and contaminants. These features may include:
- Sealing and Shielding: Some track bearings are equipped with seals or shields that provide a physical barrier against contaminants such as dirt, dust, water, and debris. These seals or shields help prevent the entry of contaminants into the bearing’s internal components, reducing the risk of damage and premature wear.
- Corrosion Resistance: Track bearings intended for use in corrosive environments are often constructed from materials that offer high corrosion resistance. Stainless steel, for example, is commonly used due to its ability to withstand exposure to moisture, chemicals, and other corrosive substances.
- Specialized Coatings: Some track bearings may feature specialized coatings or surface treatments that provide additional protection against contaminants and harsh conditions. These coatings can enhance the bearing’s resistance to corrosion, abrasion, and chemical exposure.
- High-Temperature Capability: Certain track bearings are designed to withstand high-temperature environments. They are typically constructed using heat-resistant materials and lubricants that can maintain their structural integrity and performance even under extreme heat.
- Environmental Sealing: In applications where track bearings are exposed to extreme conditions, such as underwater or in highly dusty environments, special environmental sealing measures may be employed. These measures can include the use of advanced sealing technologies or the encapsulation of the bearings within protective housings.
While track bearings are designed to withstand harsh environments and exposure to contaminants, it is important to note that their performance and longevity can still be affected over time. Regular maintenance, including cleaning, inspection, and lubrication, is crucial to ensure proper functioning and to mitigate the impact of contaminants on the bearings.
It is recommended to consult the manufacturer’s specifications and guidelines for the track bearings being used in a specific application. Manufacturers often provide information on the environmental ratings and limits of their bearings, helping users determine the suitability of the bearings for particular harsh environments or exposure to contaminants.
By selecting track bearings with appropriate features, materials, and protection, and by implementing proper maintenance practices, it is possible to enhance the bearings’ ability to withstand harsh environments and exposure to contaminants, thereby maximizing their performance and longevity.
What are the components of a track bearing assembly and their functions?
A track bearing assembly consists of several components that work together to facilitate smooth and controlled motion along a track or guide rail. Let’s explore the components of a typical track bearing assembly and their functions:
- Outer Ring: The outer ring is the outermost component of a track bearing assembly. It provides structural support and houses the rolling elements. The outer ring is designed with a track or guide surface that interfaces with the track or rail, allowing the bearing to move along the desired path.
- Inner Ring: The inner ring is located inside the outer ring and provides a mounting surface for the bearing assembly. It may have a stud or shaft for attaching the bearing to the application. The inner ring helps in aligning and positioning the bearing assembly.
- Rolling Elements: The rolling elements are the components that enable smooth rolling motion between the inner and outer rings. In track bearings, the rolling elements are typically in the form of rollers or needles. They are designed to minimize friction and distribute the load evenly along the track surface.
- Cage: The cage, also known as a retainer, is a component that holds the rolling elements in position and maintains proper spacing between them. The cage prevents the rolling elements from contacting each other, reducing friction and wear. It also helps in guiding the rolling elements during operation.
- Seals or Shields: Track bearings often incorporate seals or shields to protect the internal components from contaminants such as dirt, dust, and moisture. Seals provide a physical barrier between the bearing and the external environment, while shields offer partial protection while allowing some lubrication to reach the rolling elements.
- Lubrication: Proper lubrication is crucial for the smooth operation and longevity of track bearings. Lubrication reduces friction, dissipates heat, and prevents wear between the rolling elements and raceways. Lubricants can be applied through grease fittings or oil ports, ensuring that the rolling elements roll smoothly along the track surface.
- Mounting Hardware: Depending on the specific design and application requirements, track bearing assemblies may include mounting hardware such as studs, bolts, or fasteners. These components are used to securely attach the bearing assembly to the application, ensuring proper alignment and stability.
By combining these components, a track bearing assembly provides reliable and controlled motion along a track or guide rail. The outer and inner rings, along with the rolling elements and cage, enable smooth rolling motion, while seals or shields protect the internal components from contaminants. Proper lubrication and mounting hardware ensure optimal performance and longevity of the track bearing assembly.
editor by CX 2024-02-04
China Good quality Chrome Steel Material OEM Brand Deep Groove Ball Bearings/Ball Bearing 6310 Open Single Row wholesaler
Item Description
Chrome Metal Content OEM Model Deep Groove Ball Bearings/Ball Bearing 6310 Open up Single Row
Introduction:
Deep groove ball bearings are the most broadly used bearing variety and are the specifically versatile .They have reduced friction and are optimized for minimal noise and low vibration which enables
higher rotation speeds.They accommodate radial and axial lodas in the two instructions are straightforward to mount and demand significantly less upkeep .than other bearing varieties .
Characteristics and Advantages:
one.Minimal friction and running temperatures .low sound.and virbration
2.High running speeds
three.Substantial quality and performance abilities for your software
four.Available with a variety of greases for most circumstances including foods high quality grease,high temperature grease and solid oil
five.Accommodate radial loads and axial lodas in equally instructions
six.Increased reliablity and supply prolonged bearing and CZPT serivice life
Applications:
Electrical motors and generators
Agricuture
Material dealing with
Industrial transmissions
Food and beverage
Industrial pamps
Industrial enthusiasts
Two and 3 wheelers
Automobile and mild trucks
Photoes:
FAQ
Q1.Are you a factory or trading company?AWe are a self-possess manufacturing unit ,can provide a single-action service for our customer .from resources to different area treatments.and from technological income to delivery and to right after-income.so we can save the price of client handle the high quality and direct time .give the greatest services.
Q2.What`s your main merchandise ?ADeep groove ball bearing ,Taper roller bearing
Q3.What`s your once-a-year value of production? All around USD 8.000.000
This fall.What ‘s your direct time(USD)?A.10-15days soon after payment
Q5.What is actually your package ?A.merchandise in CZPT bags,poly luggage in cartons and then in ply wooden pallets for exporting.
Q6.What’s your ways of shipping?A.FOBHangZhou or CIF by sea or by ship
Make contact with Us:
Varieties of Ball Bearings
There are many kinds of ball bearings: Double-row angular get in touch with, Four-stage make contact with, Self-aligning, and Ceramic hybrid. Here’s a transient description of every single. For much more details, go through our write-up about Double-row angular get in touch with ball bearings. You are going to be greater knowledgeable about how they’re created. Also, find out about how the cages that maintain the balls in place are secured with rivets.
Double-row, angular-get in touch with bearing
Double-row, angular-speak to ball bearings are equivalent in their make contact with surfaces in one path, and the two pairs of bearings are installed axially opposite to 1 yet another. This style makes it possible for them to support blended loads in axial and radial instructions. These varieties of bearings are used for large-precision, substantial-velocity applications. They can be used in every little thing from turbines to dentistry gear. Double-row, angular-contact bearings are offered at Grainger, as are one-row variations.
Double-row, angular-make contact with ball bearings are a well-known selection for apps the place higher precision and higher speed are needed. The design functions of these bearings are perfect for applications with axial place limitations. In distinction, they are smaller than two one-row angular-make contact with bearings and are available in steel, polyamide, or brass cages. Whether or not you require a cage for large pace or tough functioning conditions is up to you. If you are not sure about the right cage for your application, get in touch with Schaeffler.
Single-row angular-get in touch with ball bearings are the most typical type of bearings. Double-row bearings are also accessible with a shielded outer ring, which guards the balls within the bearing from exterior contaminants. Because these double-row bearings are a great option for applications requiring high overall performance, they are often the most inexpensive option. They provide comparable functionality as solitary-row bearings but are considerably more rigid.
Preloading is a essential overall performance attribute for double-row angular-speak to ball bearings. Preloading can reduce the provider existence of double-row angular-get in touch with ball bearings by up to 380 %. Alternatively, you can preload double-row angular-speak to ball bearings by putting spacers among their outer rings. Excellent double-row angular-make contact with bearing installation will increase doing work precision and bearing daily life.
Four-point get in touch with ball bearing
The Four Stage Speak to Ball Bearing Market can be segmented into a few sorts: 35 Degree, 45 Diploma, and Other. The 35 Degree phase is anticipated to witness the speediest expansion above the next few a long time, owing to its improved operational speed and competence in axial and radial axis load managing. Other sorts of 4-point get in touch with ball bearings contain the Miniature and Deep Groove types. These are commonly utilised in vehicles, aerospace, and other industries.
These bearings are designed for oil-free screw compressors, and they attribute an outer-ring guided brass cage to reduce friction and enhance running accuracy. In addition, they have decrease routine maintenance charges in comparison to typical bearings. However, they have a greater suggest roughness value than their counterparts. Substantial-velocity functions call for high-pace bearings that can withstand quickly pace adjustments. This is since of the higher friction charge, which final results from four-position get in touch with.
The 4-Position Get in touch with Ball Bearing is a very flexible item, as it can manage radial, thrust, and minute hundreds. Due to the fact of this, it is frequently the very first decision for gradual to reasonable-pace programs. This design also has a simplified assembly procedure, demanding only a one double-50 percent-change to install. It is the very first selection of numerous automotive OEMs due to the fact it is really efficient. If you want a ball bearing with these positive aspects, you should contact a nearby bearing firm.
The Four-Level Make contact with Ball Bearing Industry will keep on to grow in spite of a challenging financial system and unstable trade circumstances. Demand for automotive and aerospace components is predicted to grow together with a range of technological breakthroughs. In the meantime, need for strength-productive goods will carry on to increase with adjustments in trade plan, an imbalance in the offer-side ecosystem, and geopolitical danger. And while all these elements will proceed to push the marketplace expansion, a number of difficulties are really worth considering.
The Four-Stage Speak to Bearing is designed with the same fundamental construction as its two-position counterpart. In a 4-point contact ball bearing, 1 ball can have 4 distinct factors of contact with two rings. Two of these make contact with points might be in diagonal place. The two remaining make contact with details adjust place and accommodate radial hundreds. Therefore, the Four-Stage Make contact with Bearing is much more flexible and robust than its two-stage counterparts.
Self-aligning ball bearing
The self-aligning ball bearing is an incredibly useful device in many industries. This variety of bearing has a sealing lip that makes make contact with with a sleek chamfer on the inner ring. Due to the fact of the self-aligning character of these bearings, they are not vulnerable to misalignment. They can endure temperatures ranging from -30°C to 120°C and need to not be heated prior to set up.
A self-aligning ball bearing is an elastomer-primarily based spherical-formed bearing with two rows of rolling aspects. These bearings can accommodate big radial masses, and their outer ring raceway is curved to supply a spherical impact. The inner ring, or cage, can be possibly cylindrical or conical. The interior diameter of a self-aligning ball bearing is usually cylindrical, but some are conical. They generally have a few oil holes.
When choosing a self-aligning ball bearing, search for a design with a huge adequate bearing diameter to accommodate the shaft’s bending. Self-aligning bearings might also be interchangeable with regular ball bearing assemblies. You can locate individual values in maker catalogues. These bearings are helpful in constrained programs, although they are not essentially best for every little thing. For instance, in programs exactly where mixed hundreds are the principal problem, self-aligning ball bearings should only be utilized if the application requires nominal misalignment.
A self-aligning ball bearing is a extremely-productive, strength-effective remedy for a selection of programs. It is a easy, reduced-maintenance resolution that tends to make your existence less complicated. Its exclusive outer raceway enables restraining springs to take up the deflection that is typical in other bearings. The result is a cooler, smoother operating motor vehicle. It also assists stop misalignment, which helps make it ideal for use in many programs.
The SKF self-aligning ball bearing is an outstanding decision for programs involving heavy deflection of the shaft. They are the lowest-friction bearing offered. Their metal plate bolstered seals stop them from separating from the shaft during operation. They are also resistant to oil, making them the excellent resolution for higher-velocity applications. In addition to this, they are created to perform in a wide assortment of temperatures.
Ceramic hybrid ball bearing
A hybrid ball bearing produced from a blend of metal and ceramics is a excellent option for substantial-pace applications necessitating electrical isolation. This mixture offers an extended lifespan and minimum electrical corrosion or seizure danger. In addition, the hybrid ball bearings have significantly less friction than steel bearings and can function at minimal speeds. To discover more about this hybrid variety of bearing, proceed reading. We’ll also go over how it can support your application.
Total ceramic balls are typically more difficult than metal, but they do have reduced density, which means they are not topic to the very same large centrifugal forces as steel balls. These benefits make ceramic ball bearings a lot far more tough, with lengthy lifespans. The two complete and hybrid ceramic ball bearings are accessible from CZPT. Go through on to find out far more about each kind. Here is a search at some of the positive aspects of each and every. You may be pleasantly stunned.
A hybrid ball bearing consists of steel inner and outer rings and a ceramic ball. It can withstand higher speeds and loads, but it truly is also designed to operate in severe temperatures. This hybrid ball bearing also requires nominal lubrication and is suited for a assortment of programs. Since of its unique attributes, hybrid bearings are lightweight and tough, and they spin more rapidly than metal balls. But how do you choose the correct one particular for your application?
A ceramic ball bearing is much better than a steel one for several applications. Its better speed functionality and reduced friction allow it to run at greater speeds than steel balls. It is also less sensitive to fluctuations in lubrication conditions than steel balls. They also tend to be less costly, so it tends to make feeling to make investments in one particular. It’s value your while. They final more time, and they never require a operate-in period.
A hybrid ball bearing is the very best option for electrical spindles with substantial velocity and hefty hundreds. A hybrid ceramic ball bearing has the edge of minimal warmth and high stiffness, and can operate at high speeds and hundreds. This thesis explores the dynamic qualities of a hybrid ceramic ball bearing, like analysis calculations and experiment verification. The final results supply reliable knowledge and lay the basis for expert spindle the best possible style exams. It is a deserving addition to any device store.